Outside Cut as Designed

Cut the Outside As Designed

Select As Designed from the Outside Cut Options dropdown control to cut the Outside as originally designed on the CMC Z1, Z (9000z), 9000 and 8000+.

This can be helpful when coming from Trace or Nesting where you have already determined how you want the Outside to be cut.
If you have Remnant Trimming on, it will also cut off the scrap edge.

For Additional Information:
Select Options Menu > Cut Outside to cut the outside of the mat.
See /wiki/spaces/FrameShop8x/pages/1942506497 to turn on/off the Outside cut.
See Advanced Outside Options: Enable Outside Cut to turn on/off the Outside cut.

Default Settings:
See Admin > Editor for the default settings for Cutting the Outside.
See Admin > Cutting for the default settings for the Advanced Options.
See Admin > Cutting for the default settings for the Cut Mode.
See Admin > Cutting for the default settings for 90 Degree Outside.
See Admin > Cutting for the default settings for Tiling.
See Admin > Cutting for the default size for the Spacing between designs.

Remnant Trimming Definition

Remnant Trimming feature trims off the remaining portion of the mat Horizontally or Vertically after cutting the design to make storing the leftovers easier.

See: Remnant Trimming Function

Advanced Outside Options
The same Outside Cut Options are available on the Advanced Outside Options screen from the Cut Mode dropdown control. Click the Set Advanced Options button on the Cut Preview screen. Default Settings: See Admin > Cutting for the default settings for the Advanced Options. See Admin > Cutting for the default settings for the Cut Mode.
On the Advanced Outside Options screen, set the Cut Mode to As Designed. The Cut Mode matches the selections from the Outside Cut Options as described above.
This can be helpful when coming from Trace or Nesting where you had already selected how you want the Outside(s) to be cut. If you have Remnant Trimming on, it will also cut off the scrap edge. Default Settings: See Admin > Cutting for the default settings for Remnant Trimming. Remnant Trimming Definition Remnant Trimming feature trims off the remaining portion of the mat Horizontally or Vertically after cutting the design to make storing the leftovers easier. See: Remnant Trimming Function

Search

Click here to check out our new How To section">Click here to check out our new How To section

Outside Cut as Designed

Cut the Outside As Designed

Advanced Outside Options