You are viewing an old version of this page. View the current version.
Compare with Current View Page History
« Previous Version 17 Next »
The 90° plastic green blade cartridge is designed to cut 90° bevels on standard 4-ply matboard.
The 90° plastic green blade cartridge is labeled 90° on the end.
Push blade cartridge release down to eject the current blade cartridge.
Turn the new cartridge over and reinsert into the head with the blade facing the CMC board and the notch on the back of the cartridge facing the head.
It should click into place.
It can only be inserted one way.
