You are viewing an old version of this content. View the current version.
Compare with Current View Version History
« Previous Version 12 Next »
Bring the project to the Cut Preview screen.
Click Set Advanced Options to access the Advanced Outside Options.
For Additional Information: See Set Advanced Options for additional outside cut options.
Toggle the Cut Outside Using 90 Degree Tool to On from the Advanced Outside Options screen.
Click OK.
Select the desired Outside Cut Option from the Advanced Outside Options for cutting the outside of the mat and click OK.
Select Off to not cut the outside of the mat.
See Cut Mode in the Set Advanced Options section.
See Shared Edge for the Cut Mode in the Set Advanced Options section.
See Full for the Cut Mode in the Set Advanced Options section.
See As Designed for the Cut Mode in the Set Advanced Options section.
Default Settings:
See Admin > Editor for the default settings for Cutting the Outside.
See Admin > Cutting for the default settings for the Advanced Options.
See Admin > Cutting for the default settings for the Cut Mode.
See Admin > Cutting for the default settings for 90 Degree Outside.
Optionally, select the desired Outside Cut Option for cutting the outside of the mat from the Cut Preview.
For Additional Information:
See Properties for selecting to Cut the Outside.
Select Options Menu > Cut Outside to cut the outside of the mat.
See /wiki/spaces/FrameShop8x/pages/1942506497 to turn on/off the Outside cut.
See Advanced Outside Options: Enable Outside Cut to turn on/off the Outside cut.
See Cut Outside Using 90 Degree Tool under Set Advanced Options.
Click Cut.
Insert the 90° blade cartridge when prompted.
