">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 19 Next »

Aligning Openings

  • Aligning Openings shows the different ways to align openings in the Nesting software.

Alignment Lines

  • Click and drag openings to the desired position. 

  • You will see blue alignment lines display when an opening is aligned with a current opening's edges which makes dragging and dropping a quick and easy way to place openings. 

Using the Alignment Buttons

  • Use the Alignment buttons to arrange the position of objects in relation to the bounding rectangle of the selected objects.

Align to Left Edge

  • Select two or more openings.

  • Click Align to Left Edge button.

  • The selected openings will align to the left-most edge of the selection.

Align to Right Edge

  • Select two or more openings.

  • Click Align to Right Edge button.

  • The selected openings will align to the right-most edge of the selection.

Align to Bottom Edge

  • Select two or more openings.

  • Click Align to Bottom Edge button.

  • The selected openings will align to the bottom-most edge of the selection.

Align to Top Edge

  • Select two or more openings.

  • Click Align to Top Edge button.

  • The selected openings will align to the top-most edge of the selection.

  • No labels