">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 51 Next »

Width Adjustment on V-Grooves

  • If the V-Groove is cutting Too Thin, Increase the Width Adjustment.

  • If the V-Groove is cutting Too Wide, Decrease the Width Adjustment.

Cutting Direction of V-Grooves

  • First Cut: Cuts the Interior cut into the Fallout Clockwise.

  • Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise.

V-Groove Width is too Thin

  • If the V-Groove is cutting Too Thin, Increase the Width Adjustment.

 Width Adjustment Full Definition

The Width Adjustment controls the Width of the V-Groove Lines.

If the V-Groove is cutting Too Thin, Increase the Width Adjustment.

 How to Adjust the Width Adjustment

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

V-Groove Width is too Wide

  • If the V-Groove is cutting Too Wide, Decrease the Width Adjustment.

 Width Adjustment Full Definition

The Width Adjustment controls the Width of the V-Groove Lines.

If the V-Groove is cutting Too Wide, Decrease the Width Adjustment.

 How to Adjust the Width Adjustment

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Opening Adjustment: V-Groove

 Opening Adjustment on V-Grooves Definition

The Opening Adjustment controls the size of the Opening cut or Object applied with non-blade cartridges.

If the V-Groove is cut Too Large, Decrease the Opening Adjustment.

If the V-Groove is cut Too Small, Increase the Opening Adjustment.

See: Opening Adjustment for V-Grooves Configurations

 How to Adjust the Width Adjustment

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Width of an Open V-Groove

  • If the Open V-Groove width is Too Large Decrease the VG-Width.

  • If the Open V-Groove width is Too Small Increase the VG-Width.

  • Adjust the VG Width of an Open V-Groove in the V-Groove Properties.

  • The VG Width in the V-Groove Properties controls the width of an Open V-Groove.

  • A VG-Width value larger than zero is an Open V-Groove.

  Normal Bevel Open V-Groove Full Definition

The Normal Bevel Open V-Groove involves two symmetrical cuts: one in the matboard and a corresponding cut in the fallout, both forming a mirrored arrangement a specified distance apart. Both the matboard core and the lower layer matboard are visible from the front.

First Cut: Cuts the Interior cut into the Fallout Clockwise: Normal Bevel Drop*.

Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise: Normal Bevel Opening.

*The Drop is one of the categories within certain opening styles, like the initial section cut of an Open V-Groove. However, it cannot be chosen as a standalone bevel type within Designer.

Select Normal Drop or Normal Drop-Front of Mat from the Current Bevel Type dropdown control to edit the interior cut configuration.

Select Normal Bevel or Normal Bevel-Front of Mat from the Current Bevel Type dropdown control to edit the exterior cut configuration.

See: 45 Degree Normal Bevel Drop Configurations

See: 45 Degree Normal Bevel Opening Configurations

See: 45 Degree Plus Normal Bevel Drop Configurations

See: 45 Degree Plus Normal Bevel Opening Configurations

See: 45 Degree Front Normal Bevel Drop Configurations

See: 45 Degree Front Normal Bevel Opening Configurations

See: 52 Degree Normal Bevel Drop Configurations

See: 52 Degree Normal Bevel Opening Configurations

 Reverse Bevel Open V-Groove Full Definition

The Reverse Bevel Open V-Groove involves two symmetrical cuts: one in the fallout and a corresponding cut in the matboard, both forming a mirrored arrangement a specified distance apart. The matboard core is not visible but the lower layer matboard color is visible from the front.

First Cut: Cuts the Interior cut into the Fallout Clockwise: Reverse Bevel Drop*.

Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise: Reverse Bevel Opening.

*The Drop is one of the categories within certain opening styles, like the initial section cut of an Open V-Groove. However, it cannot be chosen as a standalone bevel type within Designer.

Select Reverse Drop or Reverse Drop-Front of Mat from the Current Bevel Type dropdown control to edit the interior cut configuration.

Select Reverse Bevel or Reverse Bevel-Front of Mat from the Current Bevel Type dropdown control to edit the exterior cut configuration.

See: 45 Degree Reverse Bevel Drop Configurations

See: 45 Degree Reverse Bevel Opening Configurations

See: 45 Degree Plus Reverse Bevel Drop Configurations

See: 45 Degree Plus Reverse Bevel Opening Configurations

See: 45 Degree Front Reverse Bevel Drop Configurations

See: 45 Degree Front Reverse Bevel Opening Configurations

See: 52 Degree Reverse Bevel Drop Configurations

See: 52 Degree Reverse Bevel Opening Configurations

  • No labels