You are viewing an old version of this page. View the current version.
Compare with Current View Page History
« Previous Version 22 Next »
Set Optimized from the Cut Pattern dropdown control to cut Tiled mats Bi-Directionally, which will zig-zag back and forth when cutting the Outside on tiled mats on the CMC Z1, Z (9000z), 9000 and 8000+.
Click the Set Advanced Options button to access the Advanced Outside Options.
For Additional Information: Select Options Menu > Cut Outside to cut the outside of the mat.
For Additional Information: See /wiki/spaces/FrameShop8x/pages/1942506497 to turn on/off the Outside cut.
For Additional Information: See Advanced Outside Options: Enable Outside Cut to turn on/off the Outside cut for the CMC Z1, Z(9000z), 9000 and 8000+.
Default Settings: See Admin > Editor for the default settings for Cutting the Outside.
Default Settings: See Admin > Cutting for the default settings for the Advanced Options.
Default Settings: See Admin > Cutting for the default settings for Tiling.
Default Settings: See Admin > Cutting for the default settings for the Cut Mode.
Default Settings: See Admin > Cutting for the default settings for 90 Degree Outside.
Select Optimized from the Cut Pattern dropdown control.
Click OK.
It will cut the Outsides of Tiled mats in a Bi-Directional, zig-zag fashion.
See Stairstep vs. Optimized vs. Unidirectional for information on the outside cutting differences between the different Cut Patterns.
