">
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 31 Next »

Tool Line Too Far Up

 Vertical Adjustment for Non-Blade Cartridges General Definition

The Vertical Adjustment defines the global Vertical placement of objects applied with the Non-Blade Tool Cartridges.

If the Non-Blade Tool line is applied Too Far Up Vertically, Decrease the Vertical Adjustment.

If the Non-Blade Tool line is applied Too Far Down Vertically, Increase the Vertical Adjustment.

 How to Adjust the Vertical Adjustment

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Tool Line Too Far Down

  • If the Non-Blade Tool line is applied Too Far Down Vertically, Increase the Vertical Adjustment.

 Vertical Adjustment for Non-Blade Cartridges General Definition

The Vertical Adjustment defines the global Vertical placement of objects applied with the Non-Blade Tool Cartridges.

If the Non-Blade Tool line is applied Too Far Up Vertically, Decrease the Vertical Adjustment.

If the Non-Blade Tool line is applied Too Far Down Vertically, Increase the Vertical Adjustment.

 How to Adjust the Vertical Adjustment

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

  • See Also: The Vertical Home defines the global Vertical placement of objects cut with the Blade Cartridges.

  • No labels