">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 33 Next »

General Defaults

The Defaults section sets global settings to be used throughout the software.

  • Click Application Defaults in the Admin section of the Main Screen.

  • The Defaults screen will open.

Mat Defaults

The Mat Defaults section sets the defaults for the New Openings Screen and the Design Editor (described below).

Edit Opening Size First

Select the default position for the Opening Size Field position on the New Openings Screen.

  • Select Edit Opening Size First to display the Opening Size field first.

  • Unselect Edit Opening Size First to display the Outside Size field first.

Layer Direction

Select the default layer direction for designing and cutting.

  • Bottom Up

  • Top Down

Borders Order        

Select the default Border Fields order on the New Openings Screen.

 Border Definition

The Border is the area of precisely definable width between the outside edge of a Mat and the edge of the Opening(s) in Designer, Nesting, and Visualization.

See: Border Properties

See: Border Default Settings

  • Bottom Top Sides

  • Top Sides Bottom

Reveals Defaults

Set the default Reveal Values for each template layer.

 Reveal Definition

In a two-layer design, the Reveal is the amount of the bottom matboard showing under the top mat in Designer and Visualize.

The standard Reveal between the top and bottom mat is 1/4".

See: Designer Reveal Function

  • The top layer is labeled Top.

Screens

Set the default size of the FrameShop screens.

  • Select Auto Maximize* to maximize the screens to full size.

  • Select Remember Previous Size* to use the previous screen size.

*Note: Depending on your monitor size and settings, some features may be hidden if the display is not set to display full screen, especially on the Cut Preview Screen.

Standard Sizes

Set the default sizes for the openings and outside sizes available from the Sizes button drop-down control.

 Sizes Button Definition

The Sizes Button displays the Recent and Standard sizes. 

Recent lists the last ten sizes entered.

Standard lists Standard sizes associated with the current unit of measurement.

Size Category

  • Select the Sizes category to add/edit:

    • Opening

    • Outer

Standard Sizes Listing

  • The Standard Sizes lists the Sizes for the Category selected.

  • Insert, Remove or Update the entries on this list. 

Images

Get Scale on File Load

Select whether to prompt for the image scale when an image file is loaded in Visualization.

 Visualization Definition

The Visualize software allows the user to create a digitally finished product using the selected frames, matboards and the artwork.

This makes it easy to present several different variations of the design for the customer to pick from. 

See: Visualization

  • Select Get Scale on File Load to prompt for image scale.

  • Unselect Get Scale on File Load to only load the image.

Limit Image Size

Select whether to limit the size of the image file loaded into Visualization.

 Visualization Definition

The Visualize software allows the user to create a digitally finished product using the selected frames, matboards and the artwork.

This makes it easy to present several different variations of the design for the customer to pick from. 

See: Visualization

  • Select Limit Image Size and enter Max Dimension of file size to limit file size.

  • Unselect Limit Image Size to allow any image size to be loaded.

Large images slow the software down.

  • No labels