You are viewing an old version of this content. View the current version.
Compare with Current View Version History
« Previous Version 13 Next »
Select the desired Bevel/Cartridge Type that you wish to change the cut order from the Bevel/Cartridge Type Selection.
Only the objects matching the bevel/cartridge type selection will be displayed.
The other Bevel/Cartridge Type of the design on the screen will be grayed out.
The Bevel Type is the Angle that the blade cuts on the Matboard/Fallout surface when it is not cut at a 90° Right Angle.
A Cartridge is the physical component that holds a Blade, Deboss Stylus, Pen or other application tool.
For instance, selecting Openings will only display and allow you to change the Openings.
When you move your cursor across the design, only the Openings will be available to be selected and edited.
Select Openings on the Traced Object Type section.
Select the desired Opening.
Select Cut Later.
The Cut Order of the selected opening will change from within the other openings on the design, making the selected opening cut one opening later.
You can click the button again to move it again within the Cut Order.
