Upgrade/Termination Hardware Return Instructions: CMC 5000

• Head
• Driver Pack
Please see the following removal instructions for each part.

• Turn off the air.

• Turn off the computer. Remove the blade.

• Remove the head hood (held with Phillips screws w/star washers) to make access to the Head Power Plug easier.

• Unplug the head power plug by gripping the white plug housing firmly (not the flexible cable), and gently rock it back and forth while pulling up.

• Disconnect the air supply.

• Disconnect the air line by unscrewing the airline connector.

• Open the head.

• Remove the horizontal bolt from head and right hinge on the trolley plate using the 9/64 Allen wrench.

• If there is no horizontal bolt, remove small Allen screw to the right of right-hand Hinge.

• Gently slide head right (rocking up and down may help).

• Head should now slide off left hinge pins.

• Power off the Driver Pack by flipping the toggle on back to “0”.

• Unplug the Board Cable (large grey or black cable) from the back of the Driver Pack by turning black locking ring and pulling gently.

• Unplug the power cord.

• Unplug the USB Cable from the back of the Driver Pack.

• Return the Driver Pack to Wizard.

• Bubble-wrap the head and the Driver Pack and put it in the box.

• Bubble-wrap the parts.

• Fill the rest of the box with bubble-wrap/packaging peanuts.

• Ship the box back to Wizard.

• Please use the return labels that have been provided. Give the packages to your regular Fed-Ex delivery pickup.

• If you do not have regular Fed-Ex delivery, call 1-800-GOFEDEX (1-800-463-3339) to arrange pickup.

• If you have any questions, please contact Christina.Costilla@wizardcutters.com 425-551-4300 x4304.