Bump Definition | |
|---|---|
A Bump in an Oval Opening is a Lump of material left behind where the cut started and ended. If the Oval Opening has a Bump, Increase the Oval Rotation. The Oval Rotation controls for Bumps or Feathers on an Oval Opening.  See: Oval Rotation Configurations See: Oval Rotation for Openings Configurations See: Oval Rotation for Drops Configurations See: Oval Rotation for the Outside Configurations A Bump in an Oval Opening is a Lump of material left behind where the cut started and ended. If the Oval Opening has a Bump, Increase the Oval Rotation. A Bump in an Oval Drop is a Lump of material left behind where the cut started and ended. If the Oval Drop has a Bump, Increase the Oval Rotation. A Bump in an Oval Outside is a Lump of material left behind where the cut started and ended. If the Oval Outside has a Bump, Increase the Oval Rotation. A Bump in the Outside cut of an Oval V-Groove is a Lump of material left behind where the cut started and ended on the Outside cut of the Oval V-Groove. If the Outside cut of the Oval V-Groove cuts with a Bump, Decrease the Outside Oval Rotation. A Bump in the Inside cut of an Oval V-Groove is a Lump of material left behind where the cut started and ended on either the Inside Cut of the Oval V-Groove. If the Inside cut of the Oval V-Groove cuts with a Bump, Increase the Inside Oval Rotation. | |