FrameShop Content -1- EditingTheFrameShopJerseyPackages
10/05/23
Wizard™ International, Inc., 4600 116th St. SW, Mukilteo, WA 98275 888/855-3335 Fax: 425/551-4350 http://wizardcutters.com
Editing the FrameShop Jersey Packages
Jersey Package Collections
The Jersey packages contain a great number of different designs,
most of which contain standard a Jersey CutArt and a selection of
template openings which allow you the freedom to change their
size, shape or position.
These designs can be easily cut as-is, but can be personalize as
desired.
Selecting the Design
Lets use one of the Jersey Cards design for an example. I loaded
Jersey Design 1 Cards-1.
This design contains a Jersey CutArt, and Open V-Groove CutArt,
nine Card rectangles, and one Nameplate rectangle.
Rotating the Full Design
If the Jersey design is
displayed side-ways, here
is how to Rotate it so that it is viewed right-side-up. You can rotate it
sideways on the Cut Preview in order to cut it.
Select all of the objects by clicking CTRL + A.
Click the Group Button.
The openings are now
grouped together and treated
as a single opening.
Click the Advanced Tab.
Click the -90 Rotation button. The design rotate 90° Counter-
Clockwise.
Click the Dynamic Outsides button to reset the outside dimensions.
Click the Merge button to ungroup the design and click on the
background to unselect the openings. The design is now rotated.
Wizard™ International, Inc.
FrameShop Content EditingTheFrameShopJerseyPackages
10/05/23 -2-
Wizard™ International, Inc., 4600 116th St. SW, Mukilteo, WA 98275 888/855-3335 Fax: 425/551-4350 http://wizardcutters.com
Editing the Card Openings
There are nine simple rectangles for the Cards in this design.
Select one of the Cards and click on Properties. If you want to make
the change to all of the Cards, select each card by holding down the
CTRL Key and clicking on each Card opening.
From here, you can do the following edits:
Select a different Template, such as an Octagon
Change the dimensions
Move the position of the Cards by entering new X/Y
Coordinates (or simply drag the openings where desired).
Change the number of Layers
Change the Reveal
Change the Cartridge it will be cut with
Cut it as a Reverse Bevel
If you had changed the Template, you can click on the Parameters Tab and edit the specific Parameters
available for this Template.
As you make these adjustments you will see the changes appear immediately on the screen.
Editing the Open V-Groove in Trace
If you decide that you would like the Nameplate to be a different
size, the Open V-Groove will need to be edited.
First, resize the Nameplate and place it into the desired position and
save the design.
Select the Nameplate and the Open V-Groove.
Right-Click and select Convert to CutArt.
This will bring the Nameplate and the Open V-Groove into Trace.
Offset the Nameplate
Click on the outer Nameplate line.
In the Offset field, enter the amount of space you want to place
between the Nameplate and the V-Groove. We put 1.5”.
Make sure the Offset direction is set to - (minus) and click the Offset
button.
The outer Nameplate line will offset outward 1.5”.
FrameShop Content -3- EditingTheFrameShopJerseyPackages
10/05/23
Wizard™ International, Inc., 4600 116th St. SW, Mukilteo, WA 98275 888/855-3335 Fax: 425/551-4350 http://wizardcutters.com
Break Nameplate and Open V-Groove
Select the new offset rectangle and the Open V-Groove.
Click on the Break button, which will break the lines where they
intersect.
Delete Unneeded Lines
Click on the unneeded lines and click the Delete button to remove
them. Make sure to leave the new lines that connect the Open
V-Groove together.
Also delete the Nameplate, as we only want the new Open V-Groove
to be on the screen.
Connect the Open V-Groove
Click Edit > Auto Join Segments.
This will connect the lines making up the Open V-Groove and making it a single
object.
Trace the Open V-Groove
Click the Set Bevels Tab.
Click on the Open V-Groove to select it.
Click the Set button next to the desired bevel type.
Here we are tracing it as a 45° opening.
The Open V-Groove changes to the color of the bevel/cartridge type
selected.
FrameShop Content EditingTheFrameShopJerseyPackages
10/05/23 -4-
Wizard™ International, Inc., 4600 116th St. SW, Mukilteo, WA 98275 888/855-3335 Fax: 425/551-4350 http://wizardcutters.com
Save the Open V-Groove
Click the Save button and save the Open V-Groove. Take care to
give it a different filename than the original Open V-Groove and take
note of where you save it.
Load the New Open V-Groove
Close Trace and return to the original Jersey design.
Delete the original Open V-Groove.
Load the new Open V-Groove file and place it on the design.
Edit as Desired
You can also use these same steps to make changes to the Jersey
CutArt as well, making it longer, shorter, adjust the shoulders, etc.
See the Trace manual for other adjustments you can make:
Online Trace Manual
For Additional Information:
• FrameShop Online Help: Designer
• Editing Templates
• Creating an Open V-Groove
• Editing a CutArt
• Editing the Matboard Properties
• Group Openings
• Select a Different Template
• Change the Opening Dimensions
• Change the Number of Layers
• Change the Reveal
• Cartridge Selection
• Set as Reverse Bevel
• Editing the Template Parameters.
• Online Trace Manual