How Tosectionat:[HowTo...]">Check out our new How To section at: How To...

Skip to end of banner Go to start of banner

Outside Rotation on V-Grooves Definition

Skip to end of metadata

Created by dani.simmonds, last modified on Mar 30, 2023

Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Outside Rotation on V-Grooves Definition

The Outside Rotation on Non-Oval V-Grooves controls for Swoops and Flares in the Outside cut of the Non-Oval V-Grooves.

Swoop on the Outside Cut of the Non-Oval V-Groove

A Swoop in a Non-Oval V-Groove is where the corners curve inward toward the opening.
- If the Outside Non-Oval V-Groove cuts with a Swoop, Decrease the Outside Rotation.

Flare on the Outside Cut of the Non-Oval V-Groove

A Flare in a Non-Oval V-Groove is where the corners curve away from the opening.
- If the Outside Non-Oval V-Groove cuts with a Flare, Increase the Outside Rotation.

No labels