">
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 10 Next »

Tangify Tool

  • Click the Tangify button to smooth the connection between the selected circuits that are below a specified angle.

  • The angle of tangification is specified in the Tangify field. 

  • This provides a smoother cutting transition between arcs. 

  • The default setting is 6 degrees.

Tangifying an Object

  • Select the objects you want to tangify. 

  • Specify the desired angle in the Tangify field. Any selected angles below this value will be made tangent.

  • Click the Tangify button.

  • The connection between the selected arcs/curves will now be made tangent.

Exaggerated Example

Because that the above example may be difficult to see, I've created an exaggerated example to illustrate the process. 

  • Select the object you want to tangify.

  • Enter the desired Tangify angle in the Tangify field.

  • Click the Tangify button.

  • The transition between the two curves are tangified to make the cutting smoother between them.

Tangify All Circuits

  • No labels