">

Click here to check out our new How To section">Click here to check out our new How To section
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 11 Next »

Aligning Openings

Aligning Openings shows the different ways to align openings in the Nesting software.

Alignment Lines

  • Click and drag openings to the desired position. 

  • You will see blue alignment lines display when an opening is aligned with a current opening's edges which makes dragging and dropping a quick and easy way to place openings. 

Using the Alignment Buttons

  • Use the Alignment buttons to arrange the position of objects in relation to the bounding rectangle of the selected objects.

Align to Left Edge

Select two or more openings.

Click Align to Left Edge button.

The selected openings will align to the left-most edge of the selection.

This is similar to the Align to Left Edge in Design.

Align to Right Edge

Select two or more openings.

Click Align to Right Edge button.

The selected openings will align to the right-most edge of the selection.

This is similar to the Align to Right Edge in Design.

Align to Bottom Edge

Select two or more openings.

Click Align to Bottom Edge button.

The selected openings will align to the bottom-most edge of the selection.

This is similar to the Align to Bottom Edge in Design.

Align to Top Edge

Select two or more openings.

Click Align to Top Edge button.

The selected openings will align to the top-most edge of the selection.

This is similar to the Align to Top Edge in Design.

  • No labels