">
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 12 Next »

Not Cutting the Outside

  • Select Off from the Outside Cut Options dropdown control to not cut the outside of the mat on the CMC Z1 and Z (9000z).

  • The outside of the mat will not be cut. 

  • Optionally, select one of the other Outside Cut Options to cut the outside of the mat.

See Also: Cut the Outside Toggle

  • Optionally, click the Cut the Outside Toggle to Off.

  • The outside of the mat will not be cut. 

  • Select On to cut the outside of the mat.

Advanced Outside Options

  • The outside of the mat will not be cut.

Defaults: Set the Default for Cutting the Outside 

The default setting for Cutting the Outside can be set in the Admin > Editor section.

Defaults: Set the Default for the Advanced Options

The default setting for the Advanced Options can be set in the Admin > Cutting section.

Defaults: Set the Default for the Cut Mode

The default setting for the Cut Mode can be set in the Admin > Cutting section.

  • No labels