">
Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 7 Next »

Cartridges Involved

This Configuration element involves the following Cartridges.

Note: Not all cartridges are available for all CMC models.

The Other Cartridge Adjustments Involve These Cartridges

Other Cartridge Adjustments

The Other Cartridge Adjustments section contains additional configuration fields for V-Grooves and for the non-blade cartridges.

Select the Cartridge Adjustment to be Edited:

Width Adjustment (V-Groove)

Problem:

  • The V-Groove width is cut too large/too small.

Resolution:

Adjust the V-Groove Width Adjustment.

Outside Rotation (V-Groove) 

Problem:

  • The Outside V-Groove cuts with a Swoop/Flare.

Resolution:

Adjust the V-Groove Outside Rotation on a Non-Oval V-Groove.

Inside Rotation (V-Groove) 

Problem:

  • The Inside V-Groove cuts with a Swoop/Flare.

Resolution:

Adjust the V-Groove Inside Rotation on a Non-Oval V-Groove.

Outside Oval Rotation (V-Groove)  

Problem:

  • The Outside Oval V-Groove cuts with a Feather/Bump.

Resolution:

Adjust the V-Groove Outside Oval Rotation on the Outside cut of an Oval V-Groove.

Inside Oval Rotation (V-Groove)  

Problem:

  • The Inside Oval V-Groove cuts with a Feather/Bump.

Resolution:

Adjust the V-Groove Inside Oval Rotation on the Inside cut of an Oval V-Groove.

Horizontal Adjustment (Tool Specific) 

Problem:

  • The Tool Object is applied in the wrong place Horizontally.

Resolution:

Edit the Horizontal Adjustment for the Deboss, Pen or Vinyl tool.

Vertical Adjustment (Tool Specific) 

Problem:

  • The Tool Object is applied in the wrong place Vertically.

Problem:

Edit the Vertical Adjustment for the Deboss, Pen or Vinyl tool.

Depth Setting (Tool Specific) 

Problem:

  • The Tool is applied at the wrong blade depth.

Resolution:

Adjust the optimum Blade Depth for the Deboss, Pen or Vinyl tool.

Corner Pause (ms) (Tool Specific)  

Problem:

  • The Tool is tearing the matboard.

Resolution:

Adjust the amount of time to Pause in the corners, in milliseconds, when applying the Deboss, Pen or Vinyl tool.

Overshoot (Tool Specific) 

Problem:

  • The Tool line is applied too long/too short.

Resolution:

Adjust the length of the Overshoot past the end of the segment for Deboss, Pen or Vinyl tool. This is similar to an Overcut.

Plunge (Tool Specific) 

Problem:

  • Select whether to Plunge/Unplunge the Tool between segments.

Resolution:

Adjust whether to Plunge or Unplunge between segments of an object when doing a Deboss, Pen or Vinyl object.

Install Pen  

Problem:

  • How to calibrate the Pen Tool.

Resolution:

Use the Install Pen utility to calibrate the system for different pens.

  • No labels