Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 30 Next »

Air Clamp Cleaning: CMC 8500, 8000 and 5000

Debris has a chance to build up behind the Air Clamp on the CMC 8500, 8000 and 5000 models. The debris will bow the Air Clamp out into the rail. This is apparent if the customer places a piece of matboard into the lower rail and slides it to the left, and it begins to bind up.

Clean Air Clamp Rail

  • Remove the Air Clamp.

  • Clean out debris.

  • Never use sharp instruments to clean out the Clamps or the Rails.

  • Replace the Air Clamp and the Air Clamp Rail.

  • No labels