Deboss Wide Cartridge | |
|---|---|
The Blue Deboss Wide Cartridge presses a wide stylus into the matboard to create a subtle design. | |
Select the Deboss Wide Cartridge Type | |
|---|---|
Select the Deboss Tab on the Configurations screen. Select the Wide-Blue cartridge from the Cartridge dropdown control. | |
Select the Area of Concern for Wide Deboss Below:Be sure to select the Deboss Wide from the Current Bevel Type dropdown control. |
|---|
Deboss-Wide is Applied to the Wrong Place Horizontally | |
|---|---|
This is viewed from the front of the mat. Select this topic to adjust the Horizontal Adjustment. | |
Deboss-Wide is Applied to the Wrong Place Vertically | |
|---|---|
This is viewed from the front of the mat. Select this topic to adjust the Vertical Adjustment. | |
Deboss-Wide is the Wrong Size | |
|---|---|
This is viewed from the front of the mat. Select this topic to adjust the Opening Adjustment. | |
Deboss-Wide Applied at the Wrong Depth | |
|---|---|
Select this topic to adjust the Depth Setting. | |
Deboss-Wide Cartridge Tears the Mat | |
|---|---|
Select this topic to adjust the Corner Pause. | |
Deboss-Wide Lines are too Long | |
|---|---|
This is viewed from the front of the mat. Select this topic to adjust the Overshoot. | |
Deboss-Wide Lines are too Short | |
|---|---|
This is viewed from the front of the mat. Select this topic to adjust the Overshoot. | |
Deboss-Wide Set to Plunge Between Segments | |
|---|---|
Select this topic to adjust the Plunge between segments. | |
Troubleshooting Button | |
|---|---|
Use the Troubleshooting utility to make quick edits to the Configurations for a single object on the Cutting Preview. | |