This FrameShop Online Help System is for an older Version of FrameShop.+">This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 28 Next »

V-Groove Backup and Overcut Illustration

Adjust the V-Groove Backups and Overcuts to control specifically where the blade plunges in and retracts from the matboard or the fallout when cutting a V-Groove. 

V-Groove Cut Direction and Cut Order

The inside of the V-Groove cuts first in a clockwise direction. These are internal cuts, which cut into the V-Groove fallout.

The outside of the V-Groove cuts second in a counter-clockwise direction. These are external cuts, which cut into the matboard.

Current Bevel Type

Make sure to select the desired Cartridge Tab, then select the V-Groove Configuration from the Current Bevel Type dropdown control before making adjustments.

V-Groove Exterior Backup

The V-Groove Exterior Backup (green arrow) is where the blade backs up before initially plunging into the matboard on the outside cut of the V-Groove.

Exterior Cuts cut into the matboard, not the V-Groove fallout.

Select this topic to see more information on editing the V-Groove Exterior Backup. The V-Groove Exterior Backup field is marked with a Green Arrow.

V-Groove Exterior Overcut

The V-Groove Exterior Overcut (red arrow) is where the cut continues into the corner before retracting the blade from the matboard on the outside cut of the V-Groove.

Exterior Cuts cut into the matboard, not the V-Groove fallout.

Select this topic to see more information on editing the V-Groove Exterior Overcut. The V-Groove Exterior Overcut field is marked with a Red Arrow.

V-Groove Interior Backup

The V-Groove Interior Backup (black arrow) is where the blade backs up before the initially plunging into the fallout on the inside cut of the V-Groove.

Interior Cuts cut into the V-Groove fallout, not the matboard.

Select this topic to see more information on editing the V-Groove Interior Backup. The V-Groove Interior Backup field is marked with a Black Arrow.

V-Groove Interior Overcut

The V-Groove Interior Overcut (white arrow) is where the cut continues into the corner before retracting the blade from the fallout on the inside cut of the V-Groove.

Interior Cuts cut into the V-Groove fallout, not the matboard.

Select this topic to see more information on editing the V-Groove Interior Overcut. The V-Groove Interior Overcut field is marked with a White Arrow.

  • No labels