Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
« Previous
Version 20
Next »
Change to the 45 Degree Cartridge |
|---|
Note: Your hardware may look different than the model pictured, but the process is still the same. |
Push blade cartridge release down to eject the current blade cartridge. Turn 45 degree cartridge over and reinsert into the head with the blade facing the CMC board and the notch on the back of the cartridge facing the head, until it clicks into place. It can only be inserted one way.
|  |