This FrameShop Online Help System is for an older Version of FrameShop.+">This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

Edit the Openings

Move the openings to the desired positions to finish the design.

Use the Preview Tab to edit the openings. 

Moving the openings in the design can be done by simply dragging the openings to the desired positions. 

For More Detailed Editing

If you need to do more detailed editing, bring the design into the FrameShop Design Editor.

For more detailed editing, click the Design icon in the upper right corner of the screen.

The design will be brought to the FrameShop Design editor which has many editing tools available.

Use the Design components to edit the templates, and place the openings where desired.

Bring the Design to Visualize

When you have finished editing the design, bring it back into Visualize to visualize the finished piece.

When you have finished editing the design, click the Visualize icon in the upper right corner.

The design is returned to the Visualize software so you can visualize the finished piece.

  • No labels