This FrameShop Online Help System is for an older Version of FrameShop.+">This FrameShop Online Help System is for an older Version of FrameShop.

The updated 7.x FrameShop Online Help can be found here: https://wizardcutters.atlassian.net/wiki/x/hgApYw

If you are running FrameShop version FrameShop 4.1 or above you can update your software by clicking on Options then Check For Update.

What to Expect When Updating to FrameShop 7x from FrameShop 4x: https://wizardcutters.atlassian.net/wiki/x/AQDWaQ

FrameShop Installation Documents: https://wizardcutters.atlassian.net/wiki/x/_1snYw

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 6 Next »

Add TTF in Design

Use the Add True Type Font button to add a TTF to the design; TTFs are Windows Fonts.

True Type Fonts (TTF) are the True Type Fonts located in the /Windows/Fonts directory and may come from a wide variety of sources. These fonts have not been tested by Wizard and results may vary, so feel free to experiment.

Clicking to Add a True Type Font will allow you to cut, Deboss or Pen the TTF with the CMC.

Add a True Type Font

Click the Add True Type Font button on the Openings tab.

Select the desired font for the TTF. 

The TTF is placed on the Editor. 

Set the Default for TTFs

The default settings for the TTFs can be set in the Admin > Editor section.

Edit the TTF 

Click on a TTF object and click on the Properties Tab to edit the TTF Properties.

See TTF Properties for information on editing the individual proprietary adjustments available for TTF objects. 

  • No labels