Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Current »

Cut/Power/Reset

The following commands are the same as in the MatDesigner software. Refer to the MatDesigner user guide for additional information.

Click Cut to cut the mat.

Kwik Kat is designed to cut all of the circles on a 14x11” mat.

The 20” circle cuts an ellipse that has arcs that are 10” radius; i.e., 20” circle.

Click power to align the head and power the motors.

Click reset to reset the motors.

  • No labels