Bevel Types that Cut Clockwise | |
|---|---|
The following bevel types cut clockwise and are displayed viewed from the finished side: | |
Normal Bevel |  |
Normal Drop - Front of Mat |  |
Outside |  |
Reverse Bevel - Front of Mat |  |
Reverse Drop |  |
Overcut and backup description |  |
Load and Cut Test Mat | |
|---|---|
Have MatDesigner open on main screen. | |
Click Start then Programs (or All Programs) then Wizard. Click MatDesigner folder. Click on Calibration folder. Double-click on desired Path file. Select the bevel type and cartridge desired; normal bevel with the 45° cartridge would be NormalBevel45D.PATH. Normal Bevel:
Normal Drop - Front of Mat:
Outside:
Reverse Bevel - Front of Mat:
Reverse Drop:
| |