Versions Compared

Version Old Version 9 New Version Current
Changes made by

dani.simmonds

dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Change to the Debossing Tool Cartridge

Your cartridge may look slightly different than displayed below depending upon what CMC model you have, but changing the cartridge uses the same process.

Info

  • The Deboss tool cartridges are labeled with the Deboss symbol on the end.  

Image Removed

    • The

thin

    • white Thin Deboss

cartridge is white, medium is red, and wide is blue. Image Removed

    • Cartridge is labeled with a Deboss Symbol on the end.

    • The red Medium Deboss Cartridge is labeled with a Deboss Symbol on the end.

    • The blue Wide Deboss Cartridge is labeled with a Deboss Symbol on the end.

EndDebossCartridges70800.pngImage AddedImage Added

  • Push blade cartridge release down to eject the current blade cartridge.

Image Removed
Image Added

  • Turn the new cartridge over and reinsert into the head with the blade facing the CMC board and the notch on the back of the cartridge facing the head, until it clicks into place. It can only be inserted one way.

  • All of the Deboss tool cartridges are installed in the same manner.

Image Removed

Image Added