Versions Compared

Old Version 9

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version Current

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Cut the Full Outside Edge: Cut Preview Outside Cut Options

  • Select Full from the Outside Cut Options dropdown control to cut the complete outside edge of the design on the CMC Z1

and

  • , Z(9000z), 9000 and 8000+.

  • When

tiling

  • Tiling mats, it will cut out the complete outside edge of each design.

  • If you have Remnant Trimming on, it will also cut off the scrap edge.

Image Removed

Advanced Outside Options

Image Removed
Image Removed

  • The full outside edge of the design or tiled designs will be cut. 

  • If you have Remnant Trimming on, it will also cut off the scrap edge.

Image Removed

Defaults: Set the Default for Cutting the Outside 

Expand
titleDefault Setting for Cutting the Outside

The default setting for Cutting the Outside can be set in the Admin > Editor section.

Image Removed

Defaults: Set the Default for 90 Degree Outside Cut

Expand
titleDefault Setting for the 90 Degree Outside Cut

The default setting for 90 Degree Outside can be set in the Admin > Cutting section.

Image Removed

Defaults: Set the Default for the Advanced Options

Expand
titleDefault Setting for the Default Advanced Options

The default setting for the Advanced Options can be set in the Admin > Cutting section.

Image Removed

Defaults: Set the Default for the Cut Mode

Expand
titleDefault Setting for the Cut Mode

The default setting for the Cut Mode can be set in the Admin > Cutting section.

Image Removed

    • Remnant Trimming feature trims off the remaining portion of the mat Horizontally or Vertically after cutting the design to make storing the leftovers easier.

Image Added

Default Settings