Align to Left Edge
The Align to Left Edge button will align the selected openings to the left-most edge of the selection.
This is similar to the Align to Left Edge in Design.
Align to Right Edge
The Align to Right Edge button will align the selected openings to the right-most edge of the selection.
This is similar to the Align to Right Edge in Design.
Align to Bottom Edge
The Align to Bottom Edge button will align the selected openings to the bottom-most edge of the selection.
This is similar to the Align to Bottom Edge in Design.
Align to Top Edge
The Align to Top Edge button will align the selected openings to the top-most edge of the selection.
This is similar to the Align to Top Edge in Design.
Aligning Openings | ||
|---|---|---|
| ||
Alignment Lines
Click and drag openings to the desired position. You will see blue alignment lines display when an opening is aligned with a current opening's edges which makes dragging and dropping a quick and easy way to place openings.
This is similar to the Auto Align Openings in Design and Auto Align Circuits in Trace.
Using the Alignment Buttons
Hold down the CTRL key and click on two or more objects to activate the Alignment Buttons.
These work just like the Alignment Buttons in FrameShop Designer editor.
Contents:
|  |