Page Comparison

Horizontal Home for Openings: Configurations Screen

The Horizontal Home defines the global Horizontalplacement of objects cut with the Blade Cartridges.

If the Opening is cut Too Far Left Horizontally, Increase the Horizontal Home.

If the Opening is cut Too Far Right Horizontally, Decrease the Horizontal Home.

For Additional Information:
See Horizontal Home which defines the global Horizontal placement of objects cut with the Blade Cartridges.
See Horizontal Home on the Troubleshooting Utility to adjust the bladed cartridges.
See Horizontal Adjustment/wiki/spaces/FrameShop8x/pages/1942511519for placement adjustment of the non-blade Tools.

Expand

title	Horizontal Home on Openings Definition

Expand

title	How to Adjust the Horizontal Home

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Image Removed

When Cutting From the Front: Note that you will be looking at the left side of the mat as it cut, so the images displayed here would be reversed when cutting from the front.

Insert excerpt