Page Comparison

• The 90° Bevel Outside is created by cutting a 90° Right Angle into the matboard.

• The matboard core is hidden from view since there is no Bevel Type cut when cutting at a 90° Right Angle.

• The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

• The Bevel Type for the 90° openings is the form of opening cut and determines the initial blade plunge position.

The 90° Bevel Outside is created by cutting a 90° Right Angle into the matboard.

The matboard core is hidden from view since there is no Bevel Type cut when cutting at a 90° Right Angle.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

The Bevel Type for the 90° openings is the form of opening cut and determines the initial blade plunge position.

Select Outside or Outside-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

See: 90 Degree Bevel Outside Configurations

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.