Content Comparison

Cartridges Involved

This Configuration element involves the following Cartridges.

Note: Not all cartridges are available for all CMC models.

Image Removed

The Other Cartridge Adjustments Involve These Cartridges

Other Cartridge Adjustments

Image Removed

Select the Cartridge Adjustment to be Edited:

Width Adjustment (V-Groove)

Problem:

• The V-Groove width is cut too large/too small.

Resolution:

Image Removed

Image Removed

Outside Rotation (V-Groove) 

Problem:

• The Outside V-Groove cuts with a Swoop/Flare.

Resolution:

Adjust the V-Groove Outside Rotation on a Non-Oval V-Groove.

Image Removed

Inside Rotation (V-Groove) 

Problem:

• The Inside V-Groove cuts with a Swoop/Flare.

Resolution:

Adjust the V-Groove Inside Rotation on a Non-Oval V-Groove.

Image Removed

Outside Oval Rotation (V-Groove)  

Problem:

• The Outside Oval V-Groove cuts with a Feather/Bump.

Resolution:

Adjust the V-Groove Outside Oval Rotation on the Outside cut of an Oval V-Groove.

Image Removed

Inside Oval Rotation (V-Groove)  

Problem:

• The Inside Oval V-Groove cuts with a Feather/Bump.

Resolution:

Adjust the V-Groove Inside Oval Rotation on the Inside cut of an Oval V-Groove.

Image Removed

Horizontal Adjustment (Tool Specific) 

Problem:

• The Tool Object is applied in the wrong place Horizontally.

Resolution:

Edit the Horizontal Adjustment for the Deboss, Pen or Vinyl tool.

Image Removed

Vertical Adjustment (Tool Specific) 

Problem:

• The Tool Object is applied in the wrong place Vertically.

Problem:

Edit the Vertical Adjustment for the Deboss, Pen or Vinyl tool.

Image Removed

Depth Setting (Tool Specific) 

Problem:

• The Tool is applied at the wrong blade depth.

Resolution:

Adjust the optimum Blade Depth for the Deboss, Pen or Vinyl tool.

Image Removed

Corner Pause (ms) (Tool Specific)  

Problem:

• The Tool is tearing the matboard.

Resolution:

Adjust the amount of time to Pause in the corners, in milliseconds, when applying the Deboss, Pen or Vinyl tool.

Image Removed

Overshoot (Tool Specific) 

Problem:

• The Tool line is applied too long/too short.

Resolution:

Adjust the length of the Overshoot past the end of the segment for Deboss, Pen or Vinyl tool. This is similar to an Overcut.

Image Removed

Plunge (Tool Specific) 

Problem:

• Select whether to Plunge/Unplunge the Tool between segments.

Resolution:

Adjust whether to Plunge or Unplunge between segments of an object when doing a Deboss, Pen or Vinyl object.

Image Removed

Install Pen  

Problem:

• How to calibrate the Pen Tool.

Resolution:

Use the Install Pen utility to calibrate the system for different pens.

Non-Blade Tool Cartridges. Contents: Child pages (Children Display) all true depth 0 allChildren true style sortAndReverse first 0

Image Added