|
|---|
| Panel |
|---|
| panelIconId | 1f9d9-200d-2642-fe0f |
|---|
| panelIcon | :man_mage: |
|---|
| panelIconText | 🧙♂️ |
|---|
| bgColor | #FFFAE6 |
|---|
| |
| Expand |
|---|
| title | Interior Overcut of V-Grooves Definition |
|---|
| The V-Groove Interior Overcut controls where the Blade Retracts from the Fallout (not the Matboard) on the Interior cuts of the Inside Cut of the V-Groove. The Interior Cut is where the Blade Plunges or Retracts from the Fallout (not the Matboard). If the Interior Overcut on the Inside Cut of the V-Groove is cut Too Long, Decrease the Interior Overcut on V-Grooves. The V-Groove Interior Overcut field is marked with a White Arrow on the Configurations screen and the Map illustration.  Image Removed Image Removed |
| Expand |
|---|
| title | How to Adjust the Interior Overcut |
|---|
| When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
|  Image RemovedImage Removed |
V-Groove Interior Overcut too Short |
|---|
| Panel |
|---|
| panelIconId | 1f9d9-200d-2642-fe0f |
|---|
| panelIcon | :man_mage: |
|---|
| panelIconText | 🧙♂️ |
|---|
| bgColor | #FFFAE6 |
|---|
|
|
| Expand |
|---|
| title | Interior Overcut of V-Grooves Definition |
|---|
|
The V-Groove Interior Overcut controls where the Blade Retracts from the Fallout (not the Matboard) on the Interior cuts of the Inside Cut of the V-Groove.
The Interior Cut is where the Blade Plunges or Retracts from the Fallout (not the Matboard).
If the Interior Overcut on the Inside Cut of the V-Groove is cut Too Short, Increase the Interior Overcut on V-Grooves.
The V-Groove Interior Overcut field is marked with a White Arrow on the Configurations screen and the Mapillustration.Image RemovedImage Removed| Expand |
|---|
| title | How to Adjust the Interior Overcut |
|---|
|
When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
Image RemovedImage RemovedInterior Overcut on V-Grooves |
|---|
Contents:| Child pages (Children Display) |
|---|
| all | true |
|---|
| depth | 0 |
|---|
| allChildren | true |
|---|
| style | |
|---|
| sortAndReverse | |
|---|
| first | 0 |
|---|
|
| Panel |
|---|
| panelIconId | 1f9d9-200d-2642-fe0f |
|---|
| panelIcon | :man_mage: |
|---|
| panelIconText | 🧙♂️ |
|---|
| bgColor | #FFFAE6 |
|---|
| |
| Expand |
|---|
| title | How to Select the Bevel Type to Edit |
|---|
| Select desired Cartridge Tab. Select the desired Bevel Type from Current Bevel Type. Edit the desired Configuration field. |
| Expand |
|---|
| title | Cut from Front Full Definition |
|---|
| Cutting from the Front will cut with the face of the mat toward the operator, and can be selected on the Cutting Preview. If you are cutting an element that must be applied to the front of the mat, such as a V-Groove or Pen design, any openings on that layer will also cut from the front and use the Front of Mat configuration item; i.e., Normal Bevel-Front of Mat. So if you are having problems with a Normal Bevel cut on the same layer as a V-Groove, make sure you select Normal Bevel-Front of Mat to edit the configurations for that opening.  Image Removed Image Added |
| Expand |
|---|
| title | How to Adjust the Interior Overcut |
|---|
| When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
|  Image Removed |
V-Groove Cut Direction and Cut Order |
|---|
| Tip |
|---|
The Inside of the V-Groove cuts First in a Clockwise direction. These are Internal cuts, which cut into the V-Groove Fallout.
|
| Tip |
|---|
The Outside of the V-Groove cuts Second in a Counter-Clockwise direction. These are External cuts, which cut into the Matboard.
|
| Image Removed |
 Image Added |