Versions Compared

Old Version 56

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version Current

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
The Depth Setting controls the Blade Depth for theNon-Blade Tools in the Configurations.

If the Non-Blade Tool is too Deep, Decrease the Depth Setting.

If the Non-Blade Tool is too Shallow, Increase the Depth Setting.

Image RemovedToolDepthSetting70800.pngImage RemovedToolDepthSettingPrompts70800.pngImage Removed

Depth Setting on Non-Blade Cartridges

  • If the Non-Blade Tool Line is too Too Deep, Decrease the Depth Setting.

  • If the Non-Blade Tool Line is too Too Shallow, Increase the Depth Setting.

Expand
titleHow to Select the Bevel Type to Edit

Select desired Cartridge Tab. 

Select the desired Bevel Type from Current Bevel Type.

Edit the desired Configuration field.

Expand
titleHow to Adjust the Depth Setting

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Expand
titleDepth Setting Full Definition
Insert excerpt
Depth Setting
Depth Setting
nameDepth Setting
ToolDepthSettingPrompts70800.pngImage AddedToolDepthSetting70800.pngImage Added