Versions Compared

Old Version 56

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version Current

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

See: Overcut for Creases Configurations

Expand
titleHow to Adjust the Overcut
When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired

Overcut on Creases

  • If the Overcut is Too Long, Decrease the Overcut.

  • If the Overcut is Too Short, Increase the Overcut.

Contents:

Child pages (Children Display)
alltrue
depth0
allChildrentrue
style
sortAndReverse
first0
Panel
panelIconId1f9d9-200d-2642-fe0f
panelIcon:man_mage:
panelIconText🧙‍♂️
bgColor#FFFAE6
Expand
titleHow to Select the Bevel Type to Edit

Select desired Cartridge Tab. 

Select the desired Bevel Type from Current Bevel Type.

Edit the desired Configuration field.

Expand
titleHow to Adjust the Overcut

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Image Removed

Crease Overcut Too Long

  • If the Overcut is Too Long, Decrease the Overcut.

Panel
panelIconId1f9d9-200d-2642-fe0f
panelIcon:man_mage:
panelIconText🧙‍♂️
bgColor#FFFAE6
Expand
titleOvercut of Creases Definition
The Overcut controls where the BladeRetracts from the Matboard (not the Fallout) on the Exterior cuts of Openings. The initial plunge position is determined by the bevel type.

  • The Exterior Cut is where the Blade Plunges or Retracts from the Matboard (not the Fallout).  

  • If the Overcut is cut Too Long, Decrease the Overcut.

  • If the Overcut is cut Too Short, Increase the Overcut.

    • The Overcut field is marked with a Red Arrow on the Configuration screen and the Mapillustration.Image RemovedImage Removed

    field

    about five times.

    Click OK and do another test cut.

    Continue making adjustments until the desired outcome is achieved.

    Image RemovedImage Removed

    Crease Overcut Too Short

    If the Overcut is Too Short, Increase the Overcut

    .

    PanelpanelIconId1f9d9-200d-2642-fe0fpanelIcon:man_mage:panelIconText🧙‍♂️bgColor#FFFAE6

    Expand
    title
    Exterior Overcut of Creases DefinitionThe Overcut controls where the BladeRetracts from the Matboard (not the Fallout) on the Exterior cuts of Openings. The initial plunge position is determined by the bevel type.The Overcut field is marked with a Red Arrow on the Configuration screen and the Mapillustration.Image RemovedImage Removed

    See: Overcut for Creases Configurations

    Expandtitle

  • The Exterior Cut is where the Blade Plunges or Retracts from the Matboard (not the Fallout).  

  • If the Overcut is cut Too Long, Decrease the Overcut.

  • If the Overcut is cut Too Short, Increase the Overcut.

    • How to Adjust the
    Exterior
    Overcut

    When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

    Click OK and do another test cut.

    Continue making adjustments until the desired outcome is achieved.

    		Image Modified
    Image Removed
    Image Added