Exterior Overcut on Creases |
|---|
If the Overcut is Too Long, Decrease the Overcut. If the Overcut is Too Short, Increase the Overcut.
Contents:| Child pages (Children Display) |
|---|
| all | true |
|---|
| depth | 0 |
|---|
| allChildren | true |
|---|
| style | |
|---|
| sortAndReverse | |
|---|
| first | 0 |
|---|
|
| Panel |
|---|
| panelIconId | 1f9d9-200d-2642-fe0f |
|---|
| panelIcon | :man_mage: |
|---|
| panelIconText | 🧙♂️ |
|---|
| bgColor | #FFFAE6 |
|---|
| |
| Expand |
|---|
| title | How to Select the Bevel Type to Edit |
|---|
| Select desired Cartridge Tab. Select the desired Bevel Type from Current Bevel Type. Edit the desired Configuration field. |
| Expand |
|---|
| title | How to Adjust the Overcut |
|---|
| When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
 Image Removed |
|
|---|
| Panel |
|---|
| panelIconId | 1f9d9-200d-2642-fe0f |
|---|
| panelIcon | :man_mage: |
|---|
| panelIconText | 🧙♂️ |
|---|
| bgColor | #FFFAE6 |
|---|
|
|
| Expand |
|---|
| title | Overcut of Creases Definition |
|---|
|
The Overcut controls where the BladeRetracts from the Matboard (not the Fallout) on the Exterior cuts of Openings. The initial plunge position is determined by the bevel type.The Exterior Cut is where the Blade Plunges or Retracts from the Matboard (not the Fallout).
If the Overcut is cut Too Long, Decrease the Overcut.
If the Overcut is cut Too Short, Increase the Overcut.
The Overcut field is marked with a Red Arrow on the Configuration screen and the Mapillustration.
Image Removed
Image RemovedSee: Overcut for Creases Configurations
| Expand |
|---|
| title | How to Adjust the Overcut |
|---|
|
When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
 Image RemovedImage Removed | Crease Exterior Overcut Too Short |
|---|
| Panel |
|---|
| panelIconId | 1f9d9-200d-2642-fe0f |
|---|
| panelIcon | :man_mage: |
|---|
| panelIconText | 🧙♂️ |
|---|
| bgColor | #FFFAE6 |
|---|
|
|
| Expand |
|---|
| title | Exterior Overcut of Creases Definition |
|---|
|
The Overcut controls where the BladeRetracts from the Matboard (not the Fallout) on the Exterior cuts of Openings. The initial plunge position is determined by the bevel type.The Exterior Cut is where the Blade Plunges or Retracts from the Matboard (not the Fallout).
If the Overcut is cut Too Long, Decrease the Overcut.
If the Overcut is cut Too Short, Increase the Overcut.
The Overcut field is marked with a Red Arrow on the Configuration screen and the Mapillustration.Image RemovedImage RemovedSee: Overcut for Creases Configurations
| Expand |
|---|
| title | How to Adjust the Exterior Overcut |
|---|
|
When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
Image RemovedImage RemovedImage Added Image Added |