The 52° Normal Bevel Open V-Groove involves two symmetrical cuts: one in the matboard and a corresponding cut in the fallout, both forming a mirrored arrangement a specified distance apart.
Both the matboard core and the lower layer matboard are visible from the front
. The initial plunge position is determined by the bevel type
.
Expand
title
52° Normal Bevel Open V-Groove Full Definition
The
52° Normal Bevel Open V-Groove involves two symmetrical cuts: one in the matboard and a corresponding cut in the fallout, both forming a mirrored arrangement a specified distance apart. Both the matboard core and the lower layer matboard are visible from the front. The initial plunge position is determined by the bevel type
Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.
First Cut: Cuts the Interior cut into the Fallout Clockwise: Normal Bevel Drop
*
.
Second Cut:Cuts the Exterior cut into the Matboard Counter-Clockwise: Normal Bevel Opening.
*
The Drop is one of the categories within certain opening styles, like the initial section cut of an Open V-Groove.
However, it cannot be chosen as a standalone bevel type within
Designer
the Design Editor.
Select Normal Drop or Normal Drop-Front of Mat from the Current Bevel Type
dropdown control
Dropdown Control to edit the interior cut
configuration
.
Select Normal Bevel or Normal Bevel-Front of Mat from the Current Bevel Type
When adjusting Configurations, click the Plus(Increase) or Minus (Decrease) button on the desired field about five times.
Click OK and do another test cut.
Continue making adjustments until the desired outcome is achieved.
Image Removed
.
Image Added
Excerpt
hidden
true
name
52 Degree Normal Bevel Open V-Groove
The 52° Normal Bevel Open V-Groove involves two symmetrical cuts: one in the matboard and a corresponding cut in the fallout, both forming a mirrored arrangement a specified distance apart.
Both the matboard core and the lower layer matboard are visible from the front.
