Versions Compared

Old Version 5

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version Current

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
45° Reverse Bevel Open V-Groove Definition
Panel
panelIconId1f9d9-200d-2640-fe0f
panelIcon:woman_mage:
panelIconText🧙‍♀️
bgColor#FFFAE6

  • The 45° Reverse Bevel Open V-Groove involves two symmetrical cuts: one in the fallout and a corresponding cut in the matboard, both forming a mirrored arrangement a specified distance apart.

  • The matboard core is not visible but the lower layer matboard is visible from the front

. The initial plunge position is determined by the bevel type

  • .

45° Reverse Bevel Open V-Groove Full Definition
Expand
title

  • The

45° Reverse Bevel Open V-Groove involves two symmetrical cuts: one in the fallout and a corresponding cut in the matboard, both forming a mirrored arrangement a specified distance apart. The matboard core is not visible but the lower layer matboard is visible from the front. The initial plunge position is determined by the bevel type

  • Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

    • First Cut: Cuts the Interior cut into the Fallout Clockwise: Reverse Bevel Drop

*

    • .

    • Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise: Reverse Bevel Opening.

*

      • The Drop is one of the categories within certain opening styles, like the initial section cut of an Open V-Groove.

      • However, it cannot be chosen as a standalone bevel type within

Designer

      • the Design Editor.

  • Select Reverse Drop or Reverse Drop-Front of Mat from the Current Bevel Type dropdown control to edit the interior cut

configuration

  • .

  • Select Reverse Bevel or Reverse Bevel-Front of Mat from the Current Bevel Type dropdown control to edit the exterior cut

configuration

  • .

Image RemovedImage RemovedImage RemovedSee:

45MetalRBOpenVGrooveCartridge70800.pngImage Added
Excerpt
hiddentrue
name45 Degree Reverse Bevel

...

See: 45 Degree Reverse Bevel Opening Configurations

Expand
titleHow to Adjust the Configurations

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

...

Open V-Groove

  • The 45° Reverse Bevel Open V-Groove involves two symmetrical cuts: one in the fallout and a corresponding cut in the matboard, both forming a mirrored arrangement a specified distance apart.

  • The matboard core is not visible but the lower layer matboard is visible from the front.

45MetalRBOpenVGrooveCartridge70800.pngImage Added

Full Definition: 45 Degree Reverse Bevel Open V-Groove Definition