Page Comparison

...

Cartridges Involved

This Configuration element involves the following Cartridges.

Info
Note: Not all cartridges are available for all CMC models.

Image RemovedBevel Type Examples

Bevel Type Examples

Info
The examples below display the different bevel types that can be cut with the bladed cartridges

.

To edit, select the desired Cartridge Type Tab on the Configurations Screen.

Select the desired bevel type to edit from the Current Bevel Type dropdown control

.

Expand

title	Bevel Type Definition

The Bevel Type

is the Angle that

refers to the angle at which the blade cuts

on

the

Matboard/Fallout

surface of the matboard when it

is not cut at a 90° Right Angle.

Image Removed

deviates from the 90° right angle cut.

Image Added

Normal Bevel Opening

InfoA Normal Bevel Opening is cut from the back* of the mat, and displays an exposed bevel in the face of the matboard.

Expand

title	Normal Bevel Definition

The Normal Bevel Opening is

when the Angle of the blade cuts the Matboard surface so it Slants Away from the surface of the Matboard, and the Matboard Core is Seen from the front. Also referred to as Standard or Forward bevel.Cutting From the Back will cut with the face of the mat toward the CMC Board, and can be selected on the Cutting Preview

created by cutting into the matboard surface with the blade angled at 45°/52°, thereby slanting the bevel away from the matboard surface.

The matboard core is visible from the front.

The Bevel Type

is the Angle that

refers to the angle at which the blade cuts

on

the

Matboard/Fallout

surface of the matboard when it

is not cut at a 90° Right Angle

deviates from the 90° right angle cut.

Select Normal Bevel or Normal Bevel-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

Image Added

See: 45 Degree Normal Bevel Opening Configurations

See: 45 Degree Plus Normal Bevel Opening Configurations

**

See: 45 Degree Front Normal Bevel Opening

- Front of Mat

Configurations

See: 52 Degree Normal Bevel Opening Configurations

90 Degree Normal Bevel Opening

Note

*See Normal Bevel Opening - Front of Mat below for editing configurations when cutting from the front of the mat.

**See 45 Degree Front Normal Bevel Opening - Front of Mat below for the 45 Degree Front Cartridge Configurations.

Image Removed

See: 90 Degree Normal Bevel Opening Configurations

Image Added

Reverse Bevel Opening

Info
A Reverse Bevel Opening is cut from the back* of the mat, and does not display an exposed bevel in the face of the matboard.

Expand

title	Reverse Bevel Definition

The Reverse Bevel Opening is

when the Angle of the blade cuts the Matboard surface so it Slants Under the surface of the Matboard, and the Matboard Core is Not Seen from the front.Cutting From the Back will cut with the face of the mat toward the CMC Board, and can be selected on the Cutting Preview

created by cutting into the matboard surface with the blade angled at 45°/52°, thereby slanting the bevel under the matboard surface.

The matboard core is not visible from the front.

The Bevel Type

is the Angle that

refers to the angle at which the blade cuts

on

the

Matboard/Fallout

surface of the matboard when it

is not cut at a 90° Right Angle

deviates from the 90° right angle cut.

Select Reverse Bevel or Reverse Bevel-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

Image Added

See: 45 Degree Reverse Bevel Opening Configurations

See: 45 Degree Plus Reverse Bevel Opening Configurations

**

See: 45 Degree Front Reverse Bevel Opening

- Front of Mat

52 Degree Reverse Bevel Opening

Note

*See Reverse Bevel Opening - Front of Mat below for editing configurations when cutting from the front of the mat.

**See 45 Degree Front Reverse Bevel Opening - Front of Mat below for the 45 Degree Front Cartridge Configurations.

Image Removed

Normal Bevel Drop

Info

A Normal Bevel Drop is the fallout that is cut from the back* of the mat, which displays an exposed bevel on the face of the matboard.

When cutting an Open V-Groove, the inside cut uses the Normal Bevel Drop bevel configuration and the outside cuts with a Normal Bevel Opening configuration.

Configurations

See: 52 Degree Reverse Bevel Opening Configurations

Image Added

Normal Bevel Drop

Expand

title	Normal Bevel Drop Definition

The Normal Bevel Drop is

when the Angle of the blade cuts on the Fallout surface so it Slants Away from the surface of the Fallout, and the Matboard Core is Seen

created by cutting into the fallout surface with the blade angled at 45°/52°, thereby slanting the bevel away from the fallout surface.

The matboard core is visible from the front.

Cutting From the Back will cut with the face of the mat toward the CMC Board, and can be selected on the Cutting Preview

The Drop is one of the categories within certain opening styles, like the initial section cut of an Open V-Groove. However, it cannot be chosen as a standalone bevel type within Designer.

The Bevel Type

is the Angle that

refers to the angle at which the blade cuts

on

the

Matboard/Fallout

surface of the matboard when it

is not cut at a 90° Right Angle

deviates from the 90° right angle cut.

Select Normal Drop or Normal Drop-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

Image Added

See: 45 Degree Normal Bevel Drop Configurations

See: 45 Degree Plus Normal Bevel Drop Configurations

**

See: 45 Degree Front Normal Bevel Drop

- Front of Mat

Configurations

See: 52 Degree Normal Bevel Drop Configurations

See: 90 Degree

Normal Bevel

Drop Configurations

note

Image Added

*See

Normal

Reverse Bevel Drop

- Front of Mat below for editing configurations when cutting from the front of the mat.

**See 45 Degree Front Normal Bevel Drop - Front of Mat below for the 45 Degree Front Cartridge Configurations.

Image RemovedA

Expand

title	Reverse Bevel Drop Definition

Info

The Reverse Bevel Drop

is the fallout that is cut from the back* of the mat, which does not display an exposed bevel on the face of the matboard.

When cutting a Reverse Bevel Open V-Groove, the inside cut uses the Reverse Bevel Drop bevel configuration and the outside cuts with a Reverse Bevel Opening configuration.

Expand

title	Reverse Drop Definition

The Reverse Drop is when the Angle of the blade cuts the Fallout surface so it Slants Under the surface of the Fallout, and the Matboard Core is Not Seen from the front.

Cutting From the Back will cut with the face of the mat toward the CMC Board, and can be selected on the Cutting Preview.

The Bevel Type is the Angle that the blade cuts on the Matboard/Fallout surface when it is not cut at a 90° Right Angle.

Select Reverse Drop

is created by cutting into the fallout surface with the blade angled at 45°/52°, thereby slanting the bevel under the fallout surface.

The matboard core is not visible from the front.

The Drop is one of the categories within certain opening styles, like the initial section cut of an Open V-Groove. However, it cannot be chosen as a standalone bevel type within Designer.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

Select Reverse Drop or Reverse Drop-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

Image Added

See: 45 Degree Reverse Bevel Drop Configurations

See: 45 Degree Plus Reverse Bevel Drop Configurations

**

See: 45 Degree Front Reverse Bevel Drop

- Front of Mat

52 Degree Reverse Bevel Drop

Note

*See Reverse Bevel Drop - Front of Mat below for editing configurations when cutting from the front of the mat.

**See 45 Degree Front Reverse Bevel Drop - Front of Mat below for the 45 Degree Front Cartridge Configurations.

Image Removed

Outside Bevel

InfoAn Outside Bevel is the outside cut of the mat that is cut from the back* of the mat, and does not display an exposed bevel on the face of the matboard.

Configurations

See: 52 Degree Reverse Bevel Drop Configurations

Image Added

Outside Bevel

Expand

title	Outside Bevel Definition

The Outside Bevel is

when the Angle of the blade cuts the Fallout surface so it Slants Under the surface of the Fallout, and the Matboard Core is Not Seen from the front.Cutting From the Back will cut with the face of the mat toward the CMC Board, and can be selected on the Cutting Preview

created by cutting into the fallout surface with the blade angled at 45°/52°, thereby slanting the bevel under the fallout surface or simply cut at 90°.

The matboard core is not visible from the front.

The Bevel Type

is the Angle that

refers to the angle at which the blade cuts

on

the

Matboard/Fallout

surface of the matboard when it

is not cut at a 90° Right Angle

deviates from the 90° right angle cut.

Select Outside or Outside-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

Image Added

See: 45 Degree Outside

Bevel

Configurations

See: 45 Degree Plus Outside

Bevel

Configurations

**

See: 45 Degree Front Outside

Bevel - Front of Mat

Configurations

See: 52 Degree Outside

Bevel

Configurations

90 Degree Outside Bevel

Note

*See Outside Bevel - Front of Mat below for editing configurations when cutting from the front of the mat.

**See 45 Degree Front Outside Bevel - Front of Mat below for the 45 Degree Front Cartridge Configurations.

Image Removed

Normal Bevel Opening - Front of Mat

InfoA Normal Bevel Opening - Front of Mat opening is cut from the front* of the mat, and displays an exposed bevel in the face of the matboard.

See: 90 Degree Outside Configurations

Image Added

Closed V-Groove

Expand

title

Normal Bevel - Front of Mat

Closed V-Groove Definition

The Normal Bevel

- Front of Matis when the Angle of the blade cuts the Matboard surface so it Slants Away from the surface of the Matboard, and the Matboard Core is Seen from the front. Also referred to as Standard or Forward bevel.

Cutting From the Front will cut with the face of the mat toward the operator, and can be selected on the Cutting Preview or by cutting a Cut-From-Front element such as a Deboss or V-Groove.

The Bevel Type is the Angle that the blade cuts on the Matboard/Fallout surface when it is not cut at a 90° Right Angle.

Select Normal Bevel - Front of Matfrom the Current Bevel Type dropdown control to edit this configuration.

Note
See Normal Bevel Opening* above for editing configurations when cutting from the back of the mat.

Image Removed

Reverse Bevel Opening - Front of Mat

Info
A Reverse Bevel Opening - Front of Mat opening is cut from the front* of the mat, and does not display an exposed bevel in the face of the matboard.

Expand

title	Reverse Bevel - Front of Mat Definition

The Reverse Bevel - Front of Mat is when the Angle of the blade cuts the Matboard surface so it Slants Under the surface of the Matboard, and the Matboard Core is Not Seen from the front.

Cutting From the Front will cut with the face of the mat toward the operator, and can be selected on the Cutting Preview or by cutting a Cut-From-Front element such as a Deboss or V-Groove.

The Bevel Type is the Angle that the blade cuts on the Matboard/Fallout surface when it is not cut at a 90° Right Angle.

Select Reverse Bevel - Front of Mat

Closed V-Groove involves two symmetrical cuts: one in the matboard and a corresponding cut in the fallout, both forming a mirrored arrangement.

The matboard is sliced halfway through the thickness and the core is visible from the front.

First Cut: Cuts the Interior cut into the Fallout Clockwise.

Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise.

Select V-Groove from the Current Bevel Type dropdown control to edit this configuration.

Image Added

See: 45 Degree

Reverse Bevel Opening - Front of Mat

Closed V-Groove

See: 45 Degree Plus

Reverse Bevel Opening - Front of Mat

45 Degree Front Reverse Bevel Opening - Front of Mat

52 Degree Reverse Bevel Opening - Front of Mat

Note
See Reverse Bevel Opening* above for editing configurations when cutting from the back of the mat.

Image Removed

Normal Bevel Drop - Front of Mat

Info

A Normal Bevel Drop - Front of Mat is the fallout that is cut from the front* of the mat, which displays an exposed bevel on the face of the matboard.

When cutting a

Closed V-Groove

See: 45 Front Closed V-Groove

See: 52 Degree Closed V-Groove

Image Added

Open V-Groove

Normal Bevel Open V-Groove

Expand

title	Normal Bevel Open V-Groove Definition

The Normal Bevel Open V-Groove

from the front, the inside cut uses the Normal Bevel Drop - Front of Mat bevel configuration and the outside cuts with a Normal Bevel Opening - Front of mat configuration. Expand

title	Normal Drop - Front of Mat Definition

The Normal Drop is when the Angle of the blade cuts on the Fallout surface so it Slants Away from the surface of the Fallout, and the Matboard Core is Seen from the front.

Cutting From the Front will cut with the face of the mat toward the operator, and can be selected on the Cutting Preview or by cutting a Cut-From-Front element such as a Deboss or V-Groove.

The Bevel Type is the Angle that the blade cuts on the Matboard/Fallout surface when it is not cut at a 90° Right Angle.

Select Normal Drop - Front of Matfrom the Current Bevel Type dropdown control to edit this configuration.

Note
See Normal Bevel Drop* above for editing configurations when cutting from the back of the mat.

Image Removed

Reverse Bevel Drop - Front of Mat

Info
A Reverse Bevel Drop - Front of Mat is the fallout that is cut from the front* of the mat, which does not display an exposed bevel on the face of the matboard. When cutting a Reverse Bevel Open V-Groove from the Front, the inside cut uses the Reverse Bevel Drop - Front of Mat bevel configuration and the outside cuts with a Reverse Bevel Opening - Front of Mat configuration.

Expand

title	Reverse Drop - Front of Mat Definition

The Reverse Drop - Front of Mat is when the Angle of the blade cuts the Fallout surface so it Slants Under the surface of the Fallout, and the Matboard Core is Not Seen from the front.

Cutting From the Front will cut with the face of the mat toward the operator, and can be selected on the Cutting Preview or by cutting a Cut-From-Front element such as a Deboss or V-Groove.

The Bevel Type is the Angle that the blade cuts on the Matboard/Fallout surface when it is not cut at a 90° Right Angle.

Select Reverse

involves two symmetrical cuts: one in the matboard and a corresponding cut in the fallout, both forming a mirrored arrangement a specified distance apart.

Both the matboard core and the lower layer matboard are visible from the front.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

The Bevel Type determines the initial blade plunge position.

The Drop is one of the categories within certain opening styles, like the initial section cut of an Open V-Groove. However, it cannot be chosen as a standalone bevel type within Designer.

First Cut: Cuts the Interior cut into the Fallout Clockwise: Normal Bevel Drop.

Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise: Normal Bevel Opening.

Select Normal Drop or Normal Drop-Front of Mat from the Current Bevel Type dropdown control to edit

this configuration.

Note
See Reverse Bevel Drop* above for editing configurations when cutting from the back of the mat.

Image Removed

Outside Bevel - Front of Mat

Info
An Outside Bevel - Front of Mat is the outside cut of the mat that is cut from the front* of the mat, which does not display an exposed bevel on the face of the matboard.

Expand

title	Outside Bevel - Front of Mat Definition

The Outside Bevel - Front of Mat is when the Angle of the blade cuts the Fallout surface so it Slants Under the surface of the Fallout, and the Matboard Core is Not Seen from the front.

Cutting From the Front will cut with the face of the mat toward the operator, and can be selected on the Cutting Preview or by cutting a Cut-From-Front element such as a Deboss or V-Groove.

The Bevel Type is the Angle that the blade cuts on the Matboard/Fallout surface when it is not cut at a 90° Right Angle.

Select Outside

the interior cut configuration.

Select Normal Bevel or Normal Bevel-Front of Mat from the Current Bevel Type dropdown control to edit

this

the exterior cut configuration.

Image Added

See: 45 Degree

Outside Bevel - Front of Mat 45 Degree Plus Outside Bevel - Front of Mat

45 Degree Front Outside Bevel - Front of Mat

52 Degree Outside Bevel - Front of Mat90 Degree Outside Bevel - Front of Mat

Note
See Outside Bevel* above for editing configurations when cutting from the back of the mat.

Image Removed

Closed V-Groove

Info
A Closed V-Groove is a thin channel cut into the face of the matboard to reveal the matboard core color. It is cut from the front of the mat, and any other openings on that layer will also be cut from the front.

Expand

title	Closed V-Groove Definition

A Normal Bevel Closed V-Groove consists of two cuts - one in the Matboard and one in the Fallout, mirroring each other. They are cut Halfway through the matboard, revealing the Matboard Core.

The Normal Bevel is when the Angle of the blade cuts the Matboard/Fallout surface so it Slants Away from the surface of the Matboard/Fallout, and the Matboard Core is Seen from the front.

Panel

panelIconId	atlassian-check_mark
panelIcon	:check_mark:
bgColor	#FFF0B3

First Cut of the Closed V-Groove

Cuts the Interior V-Groove Line.
Cuts into Fallout, not the matboard.
Cuts Clockwise.

Panel

panelIconId	atlassian-check_mark
panelIcon	:check_mark:
bgColor	#FFF0B3

Second Cut of the Closed V-Groove

Cuts the Exterior V-Groove Line.
Cuts into Matboard, not the fallout.
Cuts Counter-Clockwise.

45 Degree Closed V-Groove45 Degree Plus Closed V-Groove

45 Front Closed V-Groove

52 Degree Closed V-Groove

Image Removed

Open V-Groove

Normal Bevel Open V-Groove

Info
A Normal Bevel Open V-Groove consists of two cuts - one in the Matboard and one in the Fallout, mirroring each other, spaced a specified distance away. They are cut through the matboard, revealing the lower layer matboard in the exposed segment.

Expand

title	Normal Bevel Open V-Groove Definition

A Normal Bevel Open V-Groove consists of two cuts - one in the Matboard and one in the Fallout, mirroring each other, spaced a specified distance away. They are cut Through the matboard, revealing the Lower Layer Matboard in the exposed segment.

The Normal Bevel is when the Angle of the blade cuts the Matboard/Fallout surface so it Slants Away from the surface of the Matboard/Fallout, and the Matboard Core is Seen from the front.

Panel

panelIconId	atlassian-check_mark
panelIcon	:check_mark:
bgColor	#FFF0B3

First Cut of the Normal Bevel Open V-Groove

Cuts the Interior V-Groove Line.
Cuts into Fallout, not the matboard.
Cuts Clockwise.
45 Degree Normal Bevel Drop
45 Degree Normal Bevel Drop - Front of Mat

Panel

panelIconId	atlassian-check_mark
panelIcon	:check_mark:
bgColor	#FFF0B3

Second Cut of the Normal Bevel Open V-Groove

Cuts the Exterior V-Groove Line.
Cuts into Matboard, not the fallout.
Cuts Counter-Clockwise.
45 Degree Normal Bevel Opening
45 Degree Normal Bevel Opening - Front of Mat

Image Removed

Reverse Bevel Open V-Groove

Info
A Reverse Bevel Open V-Groove consists of two cuts - one in the Matboard and one in the Fallout, mirroring each other, spaced a specified distance away. They are cut through the matboard, revealing the lower layer matboard in the exposed segment.

Expand

title	Reverse Bevel Open V-Groove Definition

A Reverse Bevel Open V-Groove consists of two cuts - one in the Matboard and one in the Fallout, mirroring each other, spaced a specified distance away. They are cut Through the matboard, revealing the Lower Layer Matboard in the exposed segment.

The Reverse Bevel is when the Angle of the blade cuts the Matboard surface so it Slants Under the surface of the Matboard, and the Matboard Core is Not Seen from the front.

Panel

panelIconId	atlassian-check_mark
panelIcon	:check_mark:
bgColor	#FFF0B3

First Cut of the Reverse Bevel Open V-Groove

Cuts the Interior V-Groove Line.
Cuts into Fallout, not the matboard.
Cuts Clockwise.
45 Degree Reverse Bevel Drop
45 Degree Reverse Bevel Drop - Front of Mat

Panel

panelIconId	atlassian-check_mark
panelIcon	:check_mark:
bgColor	#FFF0B3

Second Cut of the Reverse Bevel Open V-Groove

Cuts the Exterior V-Groove Line.
Cuts into Matboard, not the fallout.
Cuts Counter-Clockwise.
45 Degree Reverse Bevel Opening
45 Degree Reverse Bevel Opening - Front of Mat

Image Removed

Normal Bevel Drop Configurations

See: 45 Degree Normal Bevel Opening Configurations

See: 45 Degree Plus Normal Bevel Drop Configurations

See: 45 Degree Plus Normal Bevel Opening Configurations

See: 45 Degree Front Normal Bevel Drop Configurations

See: 45 Degree Front Normal Bevel Opening Configurations

See: 52 Degree Normal Bevel Drop Configurations

See: 52 Degree Normal Bevel Opening Configurations

Image Added

Reverse Bevel Open V-Groove

Expand

title	Reverse Bevel Open V-Groove

The Reverse Bevel Open V-Groove involves two symmetrical cuts: one in the fallout and a corresponding cut in the matboard, both forming a mirrored arrangement a specified distance apart. The matboard core is not visible but the lower layer matboard is visible from the front.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

The Bevel Type determines the initial blade plunge position.

The Drop is one of the categories within certain opening styles, like the initial section cut of an Open V-Groove. However, it cannot be chosen as a standalone bevel type within Designer.

First Cut: Cuts the Interior cut into the Fallout Clockwise: Reverse Bevel Drop.

Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise: Reverse Bevel Opening.

Select Reverse Drop or Reverse Drop-Front of Mat from the Current Bevel Type dropdown control to edit the interior cut configuration.

Select Reverse Bevel or Reverse Bevel-Front of Mat from the Current Bevel Type dropdown control to edit the exterior cut configuration.

Image Added

See: 45 Degree Reverse Bevel Drop Configurations

See: 45 Degree Reverse Bevel Opening Configurations

See: 45 Degree Plus Reverse Bevel Drop Configurations

See: 45 Degree Plus Reverse Bevel Opening Configurations

See: 45 Degree Front Reverse Bevel Drop Configurations

See: 45 Degree Front Reverse Bevel Opening Configurations

See: 52 Degree Reverse Bevel Drop Configurations

See: 52 Degree Reverse Bevel Opening Configurations

Image Added

Cartridge Type Examples

Info
See Cartridge Type Examples for examples of the different cartridge types that can be selected from the Cartridge Type Tabs. Note: Not all cartridges are available for all CMC models.

Expand

title	Cartridge Definition

A Cartridge is the physical component that holds a the Blade, Deboss Stylus, Pen or other application tool.

Image Removed

Image Added

Versions Compared

Old Version 45

New Version Current

Key

Cartridges Involved

Bevel Type Examples

Normal Bevel Opening

Reverse Bevel Opening

Normal Bevel Drop

Normal Bevel Drop

Reverse Bevel Drop

Outside Bevel

Outside Bevel

Normal Bevel Opening - Front of Mat

Closed V-Groove

Reverse Bevel Opening - Front of Mat

Normal Bevel Drop - Front of Mat

Open V-Groove

Normal Bevel Open V-Groove

Reverse Bevel Drop - Front of Mat

Outside Bevel - Front of Mat

Closed V-Groove

First Cut of the Closed V-Groove

Second Cut of the Closed V-Groove

Open V-Groove

Normal Bevel Open V-Groove

First Cut of the Normal Bevel Open V-Groove

Second Cut of the Normal Bevel Open V-Groove

Reverse Bevel Open V-Groove

First Cut of the Reverse Bevel Open V-Groove

Second Cut of the Reverse Bevel Open V-Groove

Reverse Bevel Open V-Groove

Cartridge Type Examples