Versions Compared

Old Version 40

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version Current

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Editing the Corner Pause

Expand
titleCorner Pause Definition
The Corner Pause setting in Configurations is the amount of time, in milliseconds, to pause the application of the Non-Blade Tools between segments.

Corner Pause on Non-Blade Cartridges

  • The Non-Blade Tool

is Tearing in

  • Tears the Corners

of the segments
Pausing Too Long

  • pausing too long in the Corners

of the segmentstitle
Expand

Insert excerpt
How to

Select the Bevel Type to Edit

Select desired Cartridge Tab. 

Select the desired Bevel Type from Current Bevel Type.

Edit the desired Configuration field.

Image Removed Expandtitle

Adjust the Configurations
How to Adjust the

Corner PauseWhen adjusting

Configurations

, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Image Removed

Tool is Tearing the Mat Surface

Problem:

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF

  • Tool is Tearing in the Corners. 

Resolution:

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF

  • Non-Blade Tool is Tearing in the Corners:

Panel
panelIconIdatlassian-note
panelIcon:note:
bgColor#B3F5FF

  • Non-Blade Tool is Pausing Too Long in the Corners:

Expand
titleCorner Pause Definition

The Corner Pause setting in Configurations is the amount of time, in milliseconds, to pause the application of the Non-Blade Tools between segments.

The Non-Blade Tool is Tearing in the Corners of the segments, Increase the Corner Pause. 

The Non-Blade Tool is Pausing Too Long in the Corners of the segments, Decrease the Corner Pause. 

Expand
titleHow to Adjust the Corner Pause

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

Image Removed

nameHow to Adjust Configurations
nopaneltrue

Insert excerpt
Corner Pause
Corner Pause
nameCorner Pause

DebossingPenCartridgesVinyl70800.pngImage AddedImage Added