Interior Backup on Openings
Contents: |
|
If the Interior Backup is cut Too Long, Decrease the Interior Backup.
If the Interior Backup is cut Too Short, Increase the Interior Backup.
| Expand | ||
|---|---|---|
| ||
The Interior Backup controls where the Blade Plunges into the Fallout (not the Matboard) on the Interior cuts of Openings. The Interior Cut is where the Blade Plunges or Retracts from the Fallout (not the Matboard). If the Interior Backup is cut Too Long, Decrease the Interior Backup. If the Interior Backup is cut Too Short, Increase the Interior Backup. The Interior Backup field is marked with a Black Arrow on the Configuration screen and the Map illustration. |
| Expand | ||
|---|---|---|
| ||
When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
Interior Backup on Drops
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
|
| title | Interior Backup on Drops Definition |
|---|
The Interior Backup controls where the Blade Plunges into the Fallout (not the Matboard) on the Interior cuts of Openings.
The Interior Cut is where the Blade Plunges or Retracts from the Fallout (not the Matboard).
If the Interior Backup is cut Too Long, Decrease the Interior Backup.
If the Interior Backup is cut Too Short, Increase the Interior Backup.
The Interior Backup field is marked with a Black Arrow on the Configuration screen and the Mapillustration.See: Interior Backup for Drops Configurations
| Expand | ||
|---|---|---|
| ||
When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
Interior Backup on the Outside
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
|
| title | Interior Backup on Outsides Definition |
|---|
The Interior Backup controls where the Blade Plunges into the Fallout (not the Matboard) on the Interior cuts of Openings.
The Interior Cut is where the Blade Plunges or Retracts from the Fallout (not the Matboard).
If the Interior Backup is cut Too Long, Decrease the Interior Backup.
If the Interior Backup is cut Too Short, Increase the Interior Backup.
The Interior Backup field is marked with a Black Arrow on the Configuration screen and the Mapillustration.See: Interior Backup for the Outside Configurations
| Expand | ||
|---|---|---|
| ||
When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
Interior Backup on V-Grooves
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
|
| title | Interior Backup on V-Grooves Definition |
|---|
The V-Groove Interior Backup controls where the Blade Plunges into the Fallout (not the Matboard) on the Interior cuts on the Inside Cut of the V-Groove.
The Interior Cut is where the Blade Plunges or Retracts from the Fallout (not the Matboard).
If the Interior Backup on the Inside Cut of the V-Groove is cut Too Long, Decrease the Interior Backup.
If the Interior Backup on the Inside Cut of the V-Groove is cut Too Short, Increase the Interior Backup.
The V-Groove Interior Backup field is marked with a Black Arrow on the Configuration screen and the Mapillustration.See: V-Groove Interior Backup Configurations
| Expand | ||
|---|---|---|
| ||
When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times. Click OK and do another test cut. Continue making adjustments until the desired outcome is achieved. |
|
|