Page Comparison

• A Feather in an Oval V-Groove is a Fringe of material left behind where the cut started and ended on either the Outside or Inside Cut of the Oval V-Groove.

  • If the Outside cut of the Oval V-Groove has a Feather, Increase the Outside Oval Rotation.

  • If the Inside cut of the Oval V-Groove has a Feather, Decrease the Inside Oval Rotation.

The Outside Oval Rotation for V-Grooves controls for Feathers or Bumpson the Outside Cut of an Oval V-Groove.

A Feather in the Outside cut of an Oval V-Groove is a Fringe of material left behind where the cut started and ended on the Outside cut of the Oval V-Groove.

If the Outside cut of the Oval V-Groove has a Feather, Increase the Outside Oval Rotation.

Image Removed

Image Added

See: Outside Oval Rotation for V-Grooves Configurations

The Inside Oval Rotation for V-Grooves controls for Feathers or Bumpson the Inside Cut of an Oval V-Groove.

A Feather in the Inside cut of an Oval V-Groove is a Fringe of material left behind where the cut started and ended on the Inside Cut of the Oval V-Groove.

If the Inside cut of the Oval V-Groove has a Feather, Decrease the Inside Oval Rotation.

Image Removed

Image Added

See: Inside Oval Rotation for V-Grooves Configurations

When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

Click OK and do another test cut.

Continue making adjustments until the desired outcome is achieved.

• For Feathers on an Oval Opening, see Feather on an Oval Definition.