Page Comparison

Image Removed

Select the Configurations Cartridge Type

Examples

The examples below display the different Cartridges that can be selected from the Cartridge Type Tabs.

Expand

title	Cartridge Definition

A Cartridge is the physical component that holds the Blade, Deboss Stylus, Pen or other application tool.

Image Removed

to Edit

Info
Select the desired Cartridge Type Tab to edit the configurations for that Cartridge. Examples of the Cartridges are listed below.

Image Added

45 Degree Cartridge

expand

Info
The 45 Degree Cartridge cuts a 45° bevel into the matboard.

Insert excerpt

title

	45 Degree

Cartridge Full DefinitionThe 45°

Cartridge

cuts the matboard surface with the blade angled at 45°. This angle can be displayed on either the front or the back of the mat or drop depending upon the selected Bevel Type. The initial plunge position is determined by the bevel type.The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

Select [Bevel Type] or [Bevel Type]-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

Image Removed

See: 45 Degree Normal Bevel Opening Definition

See: /wiki/spaces/FrameShop8x/pages/1948975198

See: 45 Degree Normal Bevel Drop Definition

See: 45 Degree Reverse Bevel Drop Definition

See: 45 Degree Outside Definition

See: 45 Degree Normal Bevel Closed V-Groove Definition

See: 45 Degree Normal Bevel Open V-Groove Definition

See: 45 Degree Reverse Bevel Open V-Groove Definition

Expand

title	Bevel Type Definition

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

Image Removed

	45 Degree Cartridge
name	45 Degree Cartridge

45 Degree+ Cartridge

expand

Info
The 45°+ Cartridge (45° Plus Cartridge) cuts a 45° bevel into thicker matboard such as 8-ply.

Insert excerpt

title

	45 Degree

Plus Cartridge Full DefinitionThe 45°

Plus Cartridge

cuts the matboard surface with the blade angled at 45°. This angle can be displayed on either the front or the back of the mat or drop depending upon the selected Bevel Type. The initial plunge position is determined by the bevel type.The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

Select [Bevel Type] or [Bevel Type]-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

Image Removed

Image RemovedSee:

	45 Degree Plus

Normal Bevel Opening Definition

See: 45 Degree Plus Reverse Bevel Opening Definition

See: 45 Degree Plus Normal Bevel Drop Definition

See: 45 Degree Plus Reverse Bevel Drop Definition

See: 45 Degree Plus Outside Definition

See: 45 Degree Plus Normal Bevel Closed V-Groove Definition

See: 45 Degree Plus Normal Bevel Open V-Groove Definition

See: 45 Degree Plus Reverse Bevel Open V-Groove Definition

Expand

title	Bevel Type Definition

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

Image Removed

Cartridge
name	45 Degree Plus Cartridge

45 Degree Front Cartridge

title

Info
The 45° Front Cartridge cuts a 45° bevel into the matboard from the front of the mat.
Expand

Insert excerpt

	45 Degree

Front Cartridge Full DefinitionThe 45°

Front Cartridge

cuts the front of the matboard surface with the blade angled at 45°. This angle can be displayed on either the front or the back of the mat or drop depending upon the selected Bevel Type. The initial plunge position is determined by the bevel type.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

Select [Bevel Type] or [Bevel Type]-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

Image Removed

See:

	45 Degree Front

Normal Bevel Opening Definition

See: 45 Degree Front Reverse Bevel Opening Definition

See: 45 Degree Front Normal Bevel Drop Definition

See: 45 Degree Front Reverse Bevel Drop Definition

See: 45 Degree Front Outside Definition

See: 45 Degree Front Normal Bevel Closed V-Groove Definition

See: 45 Degree Front Normal Bevel Open V-Groove Definition

See: 45 Degree Front Reverse Bevel Open V-Groove Definition

Expand

title	Bevel Type Definition

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

Image Removed

Cartridge
name	45 Degree Front Cartridge

52 Degree Cartridge

title

Info
The 52 Degree Cartridge cuts a 52° bevel into the matboard.
Expand

Insert excerpt

	52 Degree Cartridge

Full Definition

The 52° Cartridge cuts the matboard surface with the blade angled at 52°. This angle can be displayed on either the front or the back of the mat or drop depending upon the selected Bevel Type. The initial plunge position is determined by the bevel type.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

Select [Bevel Type] or [Bevel Type]-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

Image Removed

See:

	52 Degree

Normal Bevel Opening Definition

See: 52 Degree Reverse Bevel Opening Definition

See: 52 Degree Normal Bevel Drop Definition

See: 52 Degree Reverse Bevel Drop Definition

See: 52 Degree Outside Definition

See: 52 Degree Normal Bevel Closed V-Groove Definition

See: /wiki/spaces/FrameShop8x/pages/1948844274

See: 52 Degree Reverse Bevel Open V-Groove Definition

Expand

title	Bevel Type Definition

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

Image Removed

Cartridge
name	52 Degree Cartridge

90 Degree Cartridge

title

Info
The 90 Degree Cartridge cuts a 90° opening into the matboard, displaying no bevel.
Expand

Insert excerpt

	90 Degree Cartridge

Full Definition

The 90° Cartridge cuts a 90° Right Angle into the matboard. The matboard core is not visible from the front. The initial plunge position is determined by the bevel type.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

Select [Bevel Type] or [Bevel Type]-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

Image Removed

See: 90 Degree Bevel Opening Definition

See: 90 Degree Bevel Drop Definition

See: 90 Degree Outside Definition

See: 90 Degree Bevel Open V-Groove Definition

Expand

title	Bevel Type Definition

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

Image Removed

90 Degree Cartridge
name	90 Degree Cartridge

Crease Cartridge

Info
The Crease Cartridge perforates the material to make folding it easier when making Boxes.

Insert excerpt

	Crease Cartridge
	Crease Cartridge
name	Crease Cartridge

Deboss Cartridges

title

Info
The Deboss Cartridges press into the matboard to create a subtle design.
Expand

Insert excerpt

	Deboss Cartridge

General Definition

The Deboss cartridge stylus presses onto the surface of the matboard to create a subtle design.

There are three Deboss stylus sizes: Wide, Medium, Thin.

In addition to Template Shapes, you can also Deboss CutArts, LetterMats and TTFs.

Image Removed

See: Add Deboss Opening Function

See: Deboss Configurations

See: Deboss Thin Definition

See: Deboss Medium Definition

See: Deboss Wide Definition

Image Removed

	Deboss Cartridge
name	Deboss Cartridge

Pen Cartridge

title

Info
The Pen Cartridge holds a pen to the matboard to draw onto the matboard.
Expand

Insert excerpt

	Pen

Definition

Cartridge

The

	Pen Cartridge

is used to draw onto the surface of the matboard on the CMC to create a design.

You can Pen Designs, CutArts, LetterMats and TTFs.

Image Removed

See: Pen Cartridge Configurations

Image Removed


name	Pen Cartridge

Vinyl Cartridge

title

Info
The Vinyl Cartridge cuts designs into a sheet of Vinyl which has been temporarily adhered to the matboard.
Expand

Insert excerpt

	Vinyl

Definition

Cartridge

The

	Vinyl Cartridge

uses a special blade to cut the Vinyl which has been temporarily adhered to matboard to create the design.

Image Removed

See: Vinyl Cartridge Configurations

Image Removed

Crease Cartridge

Info
The Crease Cartridge perforates the material to make folding it easier when making Boxes.

Expand

title	Crease Definition

The Crease Cartridgeis used to apply Crease marks that are used to assist in folding the thicker finished Box.

Image Removed

See: Add Crease Opening Function

See: Crease Cartridge Configurations

Image Removed

Bevel Type Examples


name	Vinyl Cartridge

Panel

panelIconId	1f9d9-200d-2642-fe0f
panelIcon	:man_mage:
panelIconText	🧙‍♂️
bgColor	#FFFAE6

For Additional Information:

See Bevel Type Examples

for

for examples of the different

bevel types that the bladed cartridges can cut.

Expand

title	Bevel Type Definition

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

Image Removed

Bevel Types.

Image Added

Versions Compared

Old Version 34

New Version Current

Key

Select the Configurations Cartridge Type

to Edit

45 Degree Cartridge

45 Degree+ Cartridge

45 Degree Front Cartridge

52 Degree Cartridge

90 Degree Cartridge

Crease Cartridge

Deboss Cartridges

Pen Cartridge

Vinyl Cartridge

Crease Cartridge

Bevel Type Examples