Page Comparison

The 52° Normal Bevel Opening is created by cutting into the matboard surface with the blade angled at 52°, thereby slanting the bevel away from the matboard surface.

The matboard core is visible from the front.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

The Bevel Type determines the initial blade plunge position.

Select Normal Bevel or Normal Bevel-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

Image Removed

Image Removed

See: 52 Degree Normal Bevel Opening Configurations

The 52° Reverse Bevel Opening is created by cutting into the matboard surface with the blade angled at 52°, thereby slanting the bevel under the matboard surface.

The matboard core is not visible from the front.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

The Bevel Type determines the initial blade plunge position.

Select Reverse Bevel or Reverse Bevel-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

Image Removed

Image Removed

See: 52 Degree Normal and Reverse Bevel Opening Configurations

The 52° Normal Bevel Drop is created by cutting into the fallout surface with the blade angled at 52°, thereby slanting the bevel away from the fallout surface.

The matboard core is visible from the front.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

The Bevel Type determines the initial blade plunge position.

The Drop is one of the categories within certain opening styles, like the initial section cut of an Open V-Groove. However, it cannot be chosen as a standalone bevel type within the Design Editor.

Select Normal Drop or Normal Drop-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

Image Removed

Image Removed

See: 52 Degree Normal Bevel Drop Configurations

The 52° Reverse Bevel Drop is created by cutting into the fallout surface with the blade angled at 52°, thereby slanting the bevel under the fallout surface. The matboard core is not visible from the front.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

The Bevel Type determines the initial blade plunge position.

The Drop is one of the categories within certain opening styles, like the initial section cut of an Open V-Groove. However, it cannot be chosen as a standalone bevel type within the Design Editor.

Select Reverse Drop or Reverse Drop-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

Image Removed

Image Removed

See: 52 Degree Reverse Bevel Drop Configurations

The 52° Outside is created by cutting into the fallout surface with the blade angled at 52°, thereby slanting the bevel under the fallout surface.

The matboard core is not visible from the front.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

The Bevel Type determines the initial blade plunge position.

Select Outside or Outside-Front of Mat from the Current Bevel Type dropdown control to edit this configuration.

Image Removed

Image Removed

See: 52 Degree Outside Configurations

A 52° Normal Bevel Closed V-Groove involves two symmetrical cuts: one in the matboard and a corresponding cut in the fallout, both forming a mirrored arrangement.

The matboard is cut halfway through its thickness, revealing the core from the front.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

The Bevel Type determines the initial blade plunge position.

First Cut: Cuts the Interior cut into the Fallout Clockwise.

Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise.

Select V-Groove from the Current Bevel Type dropdown control to edit this configuration.

Image Removed

Image Removed

See: 52 Degree Normal Bevel Closed V-Groove Configurations

The 52° Normal Bevel Open V-Groove involves two symmetrical cuts: one in the matboard and a corresponding cut in the fallout, both forming a mirrored arrangement a specified distance apart.

Both the matboard core and the lower layer matboard are visible from the front.

The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

The Bevel Type determines the initial blade plunge position.

The Drop is one of the categories within certain opening styles, like the initial section cut of an Open V-Groove. However, it cannot be chosen as a standalone bevel type within the Design Editor.

First Cut: Cuts the Interior cut into the Fallout Clockwise: Normal Bevel Drop.

Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise: Normal Bevel Opening.

Select Normal Drop or Normal Drop-Front of Mat from the Current Bevel Type dropdown control to edit the interior cut configuration.

Select Normal Bevel or Normal Bevel-Front of Mat from the Current Bevel Type dropdown control to edit the exterior cut configuration.

Image Removed

Image Removed

Image Removed

See: /wiki/spaces/FrameShop8x/pages/1942492764

See: /wiki/spaces/FrameShop8x/pages/1942492547