Page Comparison

Note: Not all cartridges are available for all CMC models.

• A Normal Bevel Opening is cut from the back* of the mat, and displays an exposed bevel in the face of the matboard.

A Normal Bevel Opening displays an exposed bevel in the face of the matboard.

*See Normal Bevel Opening - Front of Mat below for editing configurations when cutting from the front of the mat.

**See 45 Degree Front Normal Bevel Opening - Front of Mat below for the 45 Degree Front Cartridge Configurations.

• A Reverse Bevel Opening is cut from the back* of the mat, and does not display an exposed bevel in the face of the matboard.

A Reverse Bevel Opening displays no exposed bevel in the face of the matboard.

*See Reverse Bevel Opening - Front of Mat below for editing configurations when cutting from the front of the mat.

**See 45 Degree Front Reverse Bevel Opening - Front of Mat below for the 45 Degree Front Cartridge Configurations.

• A Normal Bevel Drop is the fallout that is cut from the back* of the mat, which displays an exposed bevel on the face of the matboard.

• When cutting an Open V-Groove, the inside cut uses the Normal Bevel Drop bevel configuration and the outside cuts with a Normal Bevel Opening configuration.

A Normal Bevel Drop  is a drop that displays an exposed bevel on the face of the matboard drop.

*See Normal Bevel Drop - Front of Mat below for editing configurations when cutting from the front of the mat.

**See 45 Degree Front Normal Bevel Drop - Front of Mat below for the 45 Degree Front Cartridge Configurations.

• A Reverse Bevel Drop is the fallout that is cut from the back* of the mat, which does not display an exposed bevel on the face of the matboard.

• When cutting a Reverse Bevel Open V-Groove, the inside cut uses the Reverse Bevel Drop bevel configuration and the outside cuts with a Reverse Bevel Opening configuration.

A Reverse Bevel Drop  is a drop that displays no exposed bevel on the face of the matboard drop.

*See Reverse Bevel Drop - Front of Mat below for editing configurations when cutting from the front of the mat.

**See 45 Degree Front Reverse Bevel Drop - Front of Mat below for the 45 Degree Front Cartridge Configurations.

• An Outside Bevel is the outside cut of the mat that is cut from the back* of the mat, and does not display an exposed bevel on the face of the matboard.

The Outside Bevel cut of the mat does not display an exposed bevel on the face of the matboard outside.

*See Outside Bevel - Front of Mat below for editing configurations when cutting from the front of the mat.

**See 45 Degree Front Outside Bevel - Front of Mat below for the 45 Degree Front Cartridge Configurations.

• A Normal Bevel Opening - Front of Mat opening is cut from the front* of the mat, and displays an exposed bevel in the face of the matboard.

A Normal Bevel Opening - Front of Mat displays an exposed bevel in the face of the matboard.

*See Normal Bevel Opening above for editing configurations when cutting from the back of the mat.

• A Reverse Bevel Opening - Front of Mat opening is cut from the front* of the mat, and does not display an exposed bevel in the face of the matboard. 

A Reverse Bevel Opening - Front of Mat displays no exposed bevel in the face of the matboard.

*See Reverse Bevel Opening above for editing configurations when cutting from the back of the mat.

• A Normal Bevel Drop - Front of Mat is the fallout that is cut from the front* of the mat, which displays an exposed bevel on the face of the matboard.

• When cutting a Normal Bevel Open V-Groove from the front, the inside cut uses the Normal Bevel Drop - Front of Mat bevel configuration and the outside cuts with a Normal Bevel Opening - Front of mat configuration.

A Normal Bevel Drop - Front of Mat is a drop that displays an exposed bevel on the face of the matboard drop.

*See Normal Bevel Drop above for editing configurations when cutting from the back of the mat.

• A Reverse Bevel Drop - Front of Mat is the fallout that is cut from the front* of the mat, which does not display an exposed bevel on the face of the matboard.

• When cutting a Reverse Bevel Open V-Groove from the Front, the inside cut uses the Reverse Bevel Drop - Front of Mat bevel configuration and the outside cuts with a Reverse Bevel Opening - Front of Mat configuration.

A Reverse Bevel Drop - Front of Mat is a drop that displays no exposed bevel on the face of the matboard drop.

*See Reverse Bevel Drop above for editing configurations when cutting from the back of the mat.

• An Outside Bevel - Front of Mat is the outside cut of the mat that is cut from the front* of the mat, which does not display an exposed bevel on the face of the matboard.

The Outside Bevel - Front of Mat cut of the mat does not display an exposed bevel on the face of the matboard outside.

*See Outside Bevel above for editing configurations when cutting from the back of the mat.

• A Closed V-Groove is a thin channel cut into the face of the matboard to reveal the matboard core color. It is cut from the front of the mat, and any other openings on that layer will also be cut from the front.

A Closed V-Groove is a decorative channel that is cut about halfway through the thickness of the matboard, exposing the matboard core.

Closed V-Grooves are cut from the front of the mat.

First Cut of the Closed V-Groove

• Cuts the Interior V-Groove Line.

• Cuts into fallout, not the matboard.

• Cuts clockwise.

Second Cut of the Closed V-Groove

• Cuts the Exterior V-Groove Line.

• Cuts into matboard, not the fallout.

• Cuts counter-clockwise.

A Normal Bevel Open V-Groove is a decorative channel that is cut through the matboard, exposing a channel that reveals the lower layer matboard.

The bevels of the Normal Bevel Open V-Groove are displayed.

Normal Bevel Open V-Grooves can be cut from the front or the back of the mat.

First Cut of the Normal Bevel Open V-Groove

• Cuts the Interior V-Groove Line.

• Cuts into fallout, not the matboard.

• Cuts clockwise.

• 45 Degree Normal Bevel Drop

• 45 Degree Normal Bevel Drop - Front of Mat

Second Cut of the Normal Bevel Open V-Groove

• Cuts the Exterior V-Groove Line.

• Cuts into matboard, not the fallout.

• Cuts counter-clockwise.

• 45 Degree Normal Bevel Opening

• 45 Degree Normal Bevel Opening - Front of Mat

An Reverse Bevel Open V-Groove is a decorative channel that is cut through the matboard, exposing a channel that reveals the lower layer matboard.

The bevels of the Reverse Bevel Open V-Groove are not displayed.

Reverse Bevel Open V-Grooves can be cut from the front or the back of the mat.

First Cut of the Reverse Bevel Open V-Groove

• Cuts the Interior V-Groove Line.

• Cuts into fallout, not the matboard.

• Cuts clockwise.

• 45 Degree Reverse Bevel Drop

• 45 Degree Reverse Bevel Drop - Front of Mat

Second Cut of the Reverse Bevel Open V-Groove

• Cuts the Exterior V-Groove Line.

• Cuts into matboard, not the fallout.

• Cuts counter-clockwise.

• 45 Degree Reverse Bevel Opening

• 45 Degree Reverse Bevel Opening - Front of Mat

Bevel Types determine whether the bevel in the matboard is displayed or not displayed, whether it is cut as an opening, outside, drop, or applied in a different format such as a V-Groove.

A Cartridge is a component that contains a blade, stylus, pen or other apparatus that can be inserted into the head to perform a function, such as cutting, Debossing, Pen, etc.