Content Comparison

For Additional Information:

See Matboard Properties in the Design Editor to turn on/off the Outside cut.

Select Options Menu > Cut Outside on the Cut Previewto cut the outside of the mat. See /wiki/spaces/FrameShop8x/pages/1942506497 on the Cut Previewto turn on/off the Outside cut.See Enable Outside Cutunder Advanced Outside Options on the Cut Previewto toggle on/off the Outside cut.

Cut the Outside as a Shared Edge: Cut Preview Outside Cut Options

Select Shared Edge from the Outside Cut Options dropdown control to cut the shared edges of the outside cuts.

Panel

Tip
Default Settings: Shared Edge Cut Mode: Cutting Default Setting

Expand

title	Shared Edge Definition

The Shared Edge function will cut the Shared Edges of the Tiled Outside Cuts on the CMC Z1, Z(9000z), 9000 and 8000+ as one stroke between the designs, instead of cutting the outside of each mat individually.

Image Removed

See: Shared Edge Cut Mode Function

When Tiling, make sure that the Spacing under the Setup Tab is set to Zero (0) so that each design shares the Outside lines with the next design, so it will only cut the single line between them.
If you have Remnant Trimming on, it will also cut off the scrap edge.

Panel

For Additional Information: See Remnant Trimming in the Set Advanced Options section on the Cut Preview

Tip
Default Settings: Tiling Spacing: Cutting Default Setting

ExpandtitleRemnant Trimming Definition

- Remnant Trimming feature trims off the remaining portion of the mat Horizontally or Vertically after cutting the design to make storing the leftovers easier.

Image Removed

See: Remnant Trimming Function

Image Removed

Image Added

Related Links	Default Settings
Matboard: Cut the Outside Editor Properties Tab Cut Outside Options Menu: Cut Preview Cut the Outside: Cut Preview Toggle Outside Cut Options: Cut Preview Enable Outside Cut: Cut Preview Set Advanced Options Remnant Trimming: Advanced Options	Shared Edge Cut Mode: Cutting Default Setting Tiling Spacing: Cutting Default Setting