Versions Compared

Old Version 3

changes.mady.by.user dani.simmonds

Saved on

compared with

New Version Current

changes.mady.by.user dani.simmonds

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
V-Groove Interior Overcut Definition
Panel
panelIconIdatlassian-plus
panelIcon:plus:
panelIconText:plus:
bgColor#FFFAE6

  • The V-Groove Interior Overcut controls where

the blade retracts from the fallout on interior cuts on the inside cut

  • the Blade Retracts from the Fallout (not the Matboard) on the Interior cuts of the Inside Cut of the V-Groove.

  • V-Groove Interior Overcut cuts into the V-Groove fallout, not the matboard.

  • The V-Groove Interior Overcut field is marked with a White Arrow.

    • The inside of the V-Groove cuts first in a clockwise direction. These are internal cuts, which cut into the V-Groove fallout.

    • The outside of the V-Groove cuts second in a counter-clockwise direction. These are external cuts, which cut into the matboard.

    Image RemovedImage Removed

    V-Groove Backup and Overcut Illustration

    • The V-Groove Backups and Overcuts control where the blade plunges in/retracts from the matboard/fallout on exterior/interior cuts when cutting V-Grooves.

    Image Removed

    The Backups and Overcuts Fields for V-Grooves Control Specifically Where the Blade Plunges into and Retracts From the Matboard or Fallout

    V-Groove Cut Direction and Cut Order

    • The inside of the V-Groove cuts first in a clockwise direction. These are internal cuts, which cut into the V-Groove fallout.

    • The outside of the V-Groove cuts second in a counter-clockwise direction.

    • These are external cuts, which cut into the matboard.

    Image Removed

    • The initial plunge position is determined by the bevel type.

    • The Interior Cut is where the Blade Plunges or Retracts from the Fallout (not the Matboard).  

    Expand
    titleV-Groove Interior Overcut Full Definition

    The V-Groove Interior Overcut controls where the Blade Retracts from the Fallout (not the Matboard) on the Interior cuts of the Inside Cut of the V-Groove. The initial plunge position is determined by the bevel type.

    The Interior Cut is where the Blade Plunges or Retracts from the Fallout (not the Matboard).  

    If the Interior Overcut on the Inside Cut of the V-Groove is cut Too Long, Decrease the Interior Overcut on V-Grooves.

    If the Interior Overcut on the Inside Cut of the V-Groove is cut Too Short, Increase the Interior Overcut on V-Grooves.

    The V-Groove Interior Overcut field is marked with a White Arrow on the Configurations screen and the Map illustration.

    Image AddedImage Added

    See: V-Groove Interior Overcut Configurations

    Expand
    titleHow to Adjust the Configurations

    When adjusting Configurations, click the Plus (Increase) or Minus (Decrease) button on the desired field about five times.

    Click OK and do another test cut.

    Continue making adjustments until the desired outcome is achieved.

    		Image Added