Page Comparison

The 45°+ Cartridge cuts the bevel angle Bevel Angle on the thicker matboard at 45°.

• The 45°+ Blade Cartridge supports Blade Depths above 16.

This angle Bevel Angle is displayed on the Front or the Back of the mat depending upon the selected Bevel Type.

• The Bevel Type refers to the angle at which the blade cuts the surface of the matboard when it deviates from the 90° right angle cut.

• The Bevel Type determines the initial blade plunge position.

The black Black 45°+ Blade Cartridge is labeled with a 45° Angle Symbol and Plus Symbol on the Cartridge end.

The 45°+ Blade Cartridge is not selected within the Editor; it is set by using a Blade Depth above 16 on the Cut Preview.

*Older systems may have a 45°+ Yellow Plastic Blade Cartridge.