Page Comparison

Note: Not all cartridges are available for all CMC models.

• To adjust, click plus/minus on the desired field about five times.

• Click OK and do another test cut.

• Continue making adjustments until the desired outcome is achieved.

The Interior Backup controls where the Blade Plunges into the Fallout (not the Matboard) on the Interior cuts of Non-Oval Openings.

The Interior Backup field is marked with a Black Arrow on the Configuration screen and the Map illustration.

If the Interior Backup is cut Too Long, Decrease the Interior Backup.

If the Interior Backup is cut Too Short, Increase the Interior Backup.

• The Interior Backup on Openings is cutting Too long or Too short.

• Normal Bevel

• Reverse Bevel

• Normal Bevel-Front of Mat

• Reverse Bevel-Front of Mat

• If the Interior Backup is cut Too Long, Decrease the Interior Backup.

• If the Interior Backup is cut Too Short, Increase the Interior Backup.

• See Interior Backup on Openings for additional information.

The Interior Backup controls where the Blade Plunges into the Fallout (not the Matboard) on the Interior cuts of Non-Oval Openings.

The Interior Backup field is marked with a Black Arrow on the Configuration screen and the Map illustration.

If the Interior Backup is cut Too Long, Decrease the Interior Backup.

If the Interior Backup is cut Too Short, Increase the Interior Backup.

• The Interior Backup for Drops is cutting Too long or Too short.

• Normal Drop

• Reverse Drop

• Normal Drop-Front of Mat

• Reverse Drop-Front of Mat

• If the Interior Backup is cut Too Long, Decrease the Interior Backup.

• If the Interior Backup is cut Too Short, Increase the Interior Backup.

• See Interior Backup on Drops for additional information.

The Interior Backup controls where the Blade Plunges into the Fallout (not the Matboard) on the Interior cuts of Non-Oval Openings.

The Interior Backup field is marked with a Black Arrow on the Configuration screen and the Map illustration.

If the Interior Backup is cut Too Long, Decrease the Interior Backup.

If the Interior Backup is cut Too Short, Increase the Interior Backup.

• The Interior Backup for the Outside is cutting Too long or Too short.

• Outside

• Outside-Front of Mat

• If the Interior Backup is cut Too Long, Decrease the Interior Backup.

• If the Interior Backup is cut Too Short, Increase the Interior Backup.

• See Interior Backup on the Outside for additional information.

The Interior Backup controls where the Blade Plunges into the Fallout (not the Matboard) on the Interior cuts of Non-Oval Openings.

The Interior Backup field is marked with a Black Arrow on the Configuration screen and the Map illustration.

If the Interior Backup is cut Too Long, Decrease the Interior Backup.

If the Interior Backup is cut Too Short, Increase the Interior Backup.

• The Interior Backup for V-Grooves is cut Too long or Too short.

• V-Grooves

• If the Interior Backup on the Inside Cut of the V-Groove is cut Too Long, Decrease the Interior Backup.

• If the Interior Backup on the Inside Cut of the V-Groove is cut Too Short, Increase the Interior Backup.

• See Interior Backup on V-Grooves for additional information.