Blade Depth Button | ||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Contents:
|  | |||||||||||||||||||||||||||||||
Blade Depth Screen
|
Each time the Blade Depth Knob on the CMC is changed, the Blade Depth setting in the software must be changed to match.
Using the correct Blade Depth in the software helps adjust the Backups and Overcuts and other Configuration adjustments to coincide with the Depth selected.
Apply New Depth to All Layers
Check the Apply New Depth to All Layers checkbox to apply the selected Blade Depth to all of the Layers of the current design on the Cutting Preview Screen.
Set As Default
Click the Set As Default button to set the current Blade Depth value as the Default Blade Depth for the associated Opening or V-Groove field.
Select the desired Opening Blade Depth value* in the Opening field.
If desired, enter notes in the Label field for future reference for this particular Blade Depth.
Entering a Label for a Blade Depth value will be displayed from the Blade Depth Quick Select dropdown control.
| Info |
|---|
|
V-Groove Blade Depth Value
Select the desired V-Groove Blade Depth value* in the V-Groove field.
If desired, enter notes in the Label field for future reference for this particular Blade Depth.
Entering a Label for a Blade Depth value will be displayed from the Blade Depth Quick Select dropdown control.
| Info |
|---|
|
| Expand | ||
|---|---|---|
| ||
The Normal Bevel Closed V-Groove involves two symmetrical cuts: one in the matboard and a corresponding cut in the fallout, both forming a mirrored arrangement. The matboard is sliced halfway through the thickness and the core is visible from the front. First Cut: Cuts the Interior cut into the Fallout Clockwise. Second Cut: Cuts the Exterior cut into the Matboard Counter-Clockwise. Select V-Groove from the Current Bevel Type dropdown control to edit this configuration. See: 45 Degree Closed V-Groove Configurations See: 45 Degree Plus Closed V-Groove Configurations |
|
|
Cartridge and Blade Depth Prompt for the CMC Z1
After selecting the desired Blade Depth for the current layer and Aligning the Head if necessary, Click Cut to cut the mat.
If the current layer uses a different Cartridge or Blade Depth than the last mat cut, the user will be prompted to change the Cartridge and/or the Blade Depth.
Cartridge and Blade Depth Prompt for the CMC Z(9000z), 9000, 8000, 8000RC and 8000+
After selecting the desired Blade Depth for the current Layer and Aligning the Head if necessary, Click Cut to cut the mat.
If the current layer requires a different Cartridge or Blade Depth than the last mat cut, the user will be prompted to change the Cartridge and/or the Blade Depth.
Change the physical Blade Depth Dial on the Head to the requested depth.
Click OK to cut.
Returning to the Editor After Changing the Blade Depth
| Info |
|---|
|
 |