Cartridges Involved
This Configuration element involves the following Cartridges.
| Info |
|---|
Note: Not all cartridges are available for all CMC models. |
Vertical Adjustment for Non-Blade Cartridges Definition
| Expand | ||
|---|---|---|
| ||
The Vertical Adjustment defines the global Vertical placement of objects applied with the Non-Blade Tool Cartridges. If the Tool line is applied too far Up, Decrease the Vertical Adjustment. If the Tool line is applied too far Down, Increase the Vertical Adjustment. |
Adjusting the Vertical Adjustment
| Tip |
|---|
|
Select the Tool and Type
Select the tool type you want to edit from the Current Bevel Type dropdown control (if applicable) before making adjustments.
Tool Line Too Far Up
Problem:
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
|
Resolution:
| panelIconId | atlassian-note |
|---|---|
| panelIcon | :note: |
| bgColor | #B3F5FF |
Tool Line is applied too far Up:
Decrease the Vertical Adjustment.
See Vertical Adjustment for additional information.
| Expand | ||
|---|---|---|
| ||
The Vertical Adjustment defines the global Vertical placement of objects applied with the Non-Blade Tool Cartridges. If the Tool line is applied too far Up, Decrease the Vertical Adjustment. If the Tool line is applied too far Down, Increase the Vertical Adjustment. |
Tool Line Too Far Down
Problem:
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
|
Resolution:
| panelIconId | atlassian-note |
|---|---|
| panelIcon | :note: |
| bgColor | #B3F5FF |
Tool line is applied too far Down:
Increase the Vertical Adjustment.
See Vertical Adjustment for additional information.
| Expand | ||
|---|---|---|
| ||
The Vertical Adjustment defines the global Vertical placement of objects applied with the Non-Blade Tool Cartridges. If the Tool line is applied too far Up, Decrease the Vertical Adjustment. If the Tool line is applied too far Down, Increase the Vertical Adjustment. |
Contents:
|  |